|
[China]
Trade Verify
Address: Room 607, Building 1, Wuzhou International Plaza, No. 799, Yuhangtang Road, Hangzhou, Zhejiang, China
Contact name:Carey
Hangzhou Dreamy Technology Co.,Ltd |
|
Verified Suppliers
|
|
|
CE Approval Fire-retardant Wall Surface Mounted 3W LED Emergency Light
Parameters:
| Operation | Maintained/Non-maintained |
| Input Voltage | 220V-240V 50/60Hz |
| Charging Current | 120mA(Nominal) |
| Lamp type | 6pcs smd(5730) led |
| Battery Capacity | Ni-Cad, 3.6V/1.8Ah |
| Indicator | Red LED Indicates Charging,Green-AC power |
| Emergency Time | 3h |
| Material | ABS Casing and Plate & PS diffuser |
| Size/ Weight | 238mm×80mm×38mm/0.34kg |
| Working Temperature | -10°C to 55°C |
| Installation | wall surface mounted |
| Customization | Battery, Duration Time, Package |
Installation instructions:
Thisproducthas two installationways,before power connect,pleaseopen itand connect AC wire. Each step as below:
Product Shows:
Installation instructions:
Thisproducthas two installationways,before power connect,pleaseopen
itand connect AC wire. Each step as below:
L116N-A1:(Wall surface mounted) 1. Open the product(Pls. use tiny
slot type screwdriver or flats tools to tilted product’s surface
gap, make the diffuser separate from the bottom case, and take out
the middleplate. 2. Use setscrew to fasten the bottom case on the
wall. 3. Put AC wire through thebottom case hole, connect the main
circuitboard on L,N connect terminal 4. Installthe
middleplate.(Make the indicator lampthrough middleplate hold.) 5.
Close the diffuser.(Fasten with the bottom case) 6. Connect with
the AC power.
