Home Companies Hangzhou Dreamy Technology Co.,Ltd

High Brightness Waterproof Emergency Twin Spot Light With 3 Years Warranty

Contact Us

[China]

Trade Verify

Address: Room 607, Building 1, Wuzhou International Plaza, No. 799, Yuhangtang Road, Hangzhou, Zhejiang, China

Contact name:Carey

Hangzhou Dreamy Technology Co.,Ltd

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

High Brightness Waterproof Emergency Twin Spot Light With 3 Years Warranty

Country/Region	china
City & Province	hangzhou zhejiang

Product Details

High Brightness Waterproof Emergency Twin Spot Light With 3 Years Warranty

Product Feature:

This product meets the CE standard, use high quality electronic components especially for Ni-Cad battery. Lamp type is highlighting SMD LED,our emergency light has high lumens,long lifetime, and low energy dissipation feature. The product has charge and discharge protection function, which makes the battery to achieve the best lifespan. What’s more, this product has been tested in a humid environment and can reach IP65 Rate.

Technical parameters:

Power source: AC220V-240V 50/60Hz
Lamp type: 2*42 SMD 3014 white LED
Output power: ≤8W
Emergency light duration time: ≥180mins
Switching time: ≤IS
Emergency switch voltage: AC134V-187V 50Hz/60Hz
Battery specification: 6V/4500mAH

Specification:

Operation	Non-maintained
Input Voltage	110V-127V 50/60Hz;220V-240V 50/60Hz
Charging Current	120mA(Nominal)
Lamp type	2×42 pcs 3014 SMD LED
Battery	Nickel-Cadmium Battery 6V/4.5Ah
Indicator	Green LED Indicates Power On
Duration Time	More than 3 hours
Construction	PC Casing and PC Diffuser
IP Rate	IP65
Installation	Wall Surface Mounted
Weight	2.15 kg
Working Temperature	-10℃ to 55℃
Size	280mm×133mm×320mm
Customization	Battery, Duration Time, Package

Using instruction:

The products can be installed in outside, humid environment and the place does not have corrosive gas.
It should be single circuit line, please do not share the common return with other lights or any electrical appliance with switch, which makes sure the emergency light can charge at normal.
Please change the battery when the emergency time is less than rated time. Method: Cut off the Power, take out the products. Then open the upper cover, unplug the connection line between battery and circuit board, take off the battery, fasten the new battery in the original place and put the battery connector plug on the circuit board. After finish these step, please close up the cover, put the product in the original place and plug in.
Check and confirm the product work normally.
Installation size is according to mounting hole position of product back.
The product has been discharged when leave the factory. Please charge at least 20 hours before use, which can reach rated emergency time.
Please charge and discharge each 3 months after long term storage and stop using for products, it can protect the performance of the battery.

Product Show: