Xi'An Tiptop Machinery Co., Ltd. |
Oilfield Solid Control Equipment Desander, Hydrocyclone and Shale Shaker Combine
Desander is the second equipment in solids control system, it is used to separate the solid phase particles whose diameter is more than 44μm from drilling fluid.
Desander is the combination of hydrocyclone and shale shaker. The main body can be separated into two parts, the top part is the hydrocyclone and the bottom is the circular shale shaker. The vibration exciter is driven by a vibration motor to keep the whole screen box vibrate with a forward circular track.
The mud produces pressure and speed when it passes the centrifugal pump, and flows into the hydrocyclone along the wall, the bigger solid particles along the wall of hydrocyclone sink spirally under the centrifugal force and gravity, and to be discharged from the bottom flow hole and fall on the under micro mesh sieve for separation. The other mediums rise along the spiral of hydrocyclone, flow into the third class separation equipment-desilter for a further cleaning treatment from the overflow hole. The above procedure guarantees the mud can be well handled in the next equipments and decrease the workload.
1. Combined by the 10" or 12" hydrocyclones and pipes, the
operation and maintenance are much easier.
2. Use the abrasion resistant special polyurethane which is
corrosion resistant, anti-scouring and has a long life.
3. Put the materials into desander along the tangent line of the
feed inlet, the transition is smooth and is in favor of improving
separation efficiency. The range of separation size is large.
4. The bottom flow hole of hydrocyclone discharges the sand
particles as an umbrella and the “wet bottom” discharging can make
the particles be discharged quickly, and reduce the probability of
bottom flow hole block.
5. The symmetrical inlet structure makes the hydrocyclone
allocation more reasonable and the work more stable.
6. The bottom flow hole can be adjusted to control the handling
capacity to match the different requirements.
7. According to the clients' requirements of the handling capacity,
the desander can be made up by several groups of hydrocyclone.
Desander Parameters
Model | CSQ250×1 | CSQ250×1 | CSQ250×2 | CSQ300×2 | |
Treating Capacity | 90m³/h | 120m³/h | 240m³/h | 300m³/h | |
396GPM | 528GPM | 1056GPM | 1320GPM | ||
Separation Size | 40~75μm | ||||
Cone Size | 10"(250) | 10"(250) | 10"(250) | 12"(300) | |
Cone Number | 1 | 1 | 2 | 2 | |
Pressure | 0.25~0.40Mpa | ||||
Matching Pump | SB5×4-12-22kW | SB6×5-12-30kW | SB8×6-13-55kW | SB8×6-13-55kW | |
Electric Specs | 380V/50HZ or 460V/60HZ or Customized | ||||
EX standard | Ex dⅡ BT4 | ||||
Inlet Diameter | DN150 | ||||
Outlet Diameter | DN200 | ||||
Matching Shaker | Screen Specification | 600×1600mm,120-300 mesh | |||
Screen Type | Soft Hookstrip | ||||
Motor Power | 0.4kW | ||||
Dimension | 1200×1200×2000mm | 1470×1400×2000mm | 1500×1750×2020mm | ||
Weight | 585kg | 615kg | 610kg | ||
Remark | 10"Cones=90~120m3/h , 12" Cones>120m3/h | ||||
The motor power of centrifugal pump choosed is according to drilling mud specific gravity 1.2g/cm3 |