Active Member
|
[China]
Address: City window,Jinye Road,High Tech Zone, Xi'an, China
Contact name:Dan
Xi'An Tiptop Machinery Co., Ltd. |
|
|
Downhole Fishing Tool Cone Junk Catcher for 4 5/8''~12 1/4'' Well Hole
Cone junk catcher is used to catch the small junk from down hole, such as cone, cutters, hand tools, iron junk, etc. It has advantages of simple structure, safe and reliable using. Especially in the deeper structured well. It can protect the bit when using this tool to clean the bottom hole before using the PDC bit.
Please email us for your cone junk catcher inquiries.
Specification
| OD mm(inch) | Specification | Connection |
| 98 (3 7/8) | Suitable for 127 (5)” casing and 117 (4 5/8”)well hole, catch max.
OD 45, finger type claw shrinking pressure 17.5 Mpa, bursting pressure 21.8 Mpa. | 2 7/8REG |
| 111 (4 3/8) | Suitable for 140 (5 1/2”) casing and 117 (4 5/8”) well hole,catch
max.OD 55, finger type claw shrinking pressure 17.5 Mpa, bursting pressure 21.8 Mpa. | 2 7/8REG |
| 146 (3 7/8) | Suitable for 178 (7”) casing and 152.4 (6”) well hole, catch max.
OD 90, finger type claw shrinking pressure 17.5 Mpa,bursting pressure 21.8 Mpa. | NC38 |
| 194 (7 5/8) | Suitable for 244 (9 5/8”) casing and 216 (8 1/2”) well hole, catch
max.OD 135, finger type claw shrinking pressure 17.5 Mpa, bursting pressure 21.8 Mpa. | NC50 |
| 200 (7 7/8) | Suitable for 244 (9 5/8”) casing and 216 (8 1/2”) well hole, catch
max. OD 135, finger type claw shrinking pressure 17.5 Mpa, bursting pressure 21.8 Mpa. | NC50 |
| 210 (8 9/32 ) | Suitable for 244 (9 5/8”) casing and 216 (8 1/2”) well hole,catch
max. OD 135, finger type claw shrinking pressure 17.5 Mpa, bursting pressure 21.8 Mpa. | NC50 |
| 295 (11 39/64) | Suitable for 311 (12 1/4”) well hole,catch max.OD 220, finger type claw shrinking pressure 17.5 Mpa, bursting pressure 21.8 Mpa. | 6 5/8REG |
