Dental Strong High Speed Air Turbine Handpiece Torque / Standard Head

Dental Strong Handpiece Torque/Standard Head High Speed Air Turbinas Dentales With Factory Price

Dental Handpiece High Speed Quick Details:

Bur Applicable: Φ1.59mm-Φ1.60mm
Rotation Speed: 300,000~420,000rpm
Head Diameter: Φ11mm(standard)
Cartridge: Chiinese Ceramic Cartridge

Dental handpiece high speed DR-163 Features

1. Chinese ceramic ball bearing; open style cartridge.

2. Lower cost, higher performance.

3. Triple water spray, better cooling 

4. Push button type to change bur 

5. Streamlined design, comfortable for hand feeling

6. Quiet operation not more than 60db to protect your hearing.

Dental handpiece high speed DR-163 Technical Data

Dental handpiece high speed DR-163 

Our Services:

1. The products is warranted for one year from the date of effective delivery(except for artificial damage)

2. Problems caused by the following cases are not include in scope of quality warranty:
a. Non-observance of use and maintenance instruction, tumbles or beats;
b. Improper storing;
c. Action of natural agents and technical assistance carried out by non-authorized personnel.
3. Quality warranty will be stopped under these following cases:
a. Alterations in the product;
b. Use of improper fittings;
c. Technical assistance carried out by Dorit non-authorized person.
4. This warranty is valid in the country where the sales documents were permitted.

After each patient use , maintenance should be done as follows:

1. First remove the diamond burs , and clean up all the teeth on dental handpieces precipitate

2. Use a metal needle to clean the spray holes and fumaroles

Note: The spray holes and diamond burs into 40 -degree angle , fumaroles and diamond burs to a 30 degree angle

3. Place the clean lubricating oil is sprayed into the axial hole 1-2 seconds ( diamond burs is plugged holes )

4. In the bottom of the handpiece were ( with / without quick connector ) two kinds of styling , make the right amount of lubricant is injected into the bottom

5. The handpiece with quick connector combination ( first determine the water switch is turned off )

6. Replace the diamond burs , surrounded by white silk cloth handpiece head ( make sure the needle does not touch the diamond burs and white gauze , so as not to tie )

7. pedal depressed for about 20 seconds , look at whether there is in white gauze on any stain. If there are stains on the white gauze , again, add oil , starting from item 4 continued routine maintenance , know that white gauze until no stain

8. Finally, no more than 135 degrees Celsius temperature and high pressure sterilization