Hanging Type UV Air Purification System , 120w Ozone Disinfection Machine

Wall - Mounted Air Disinfection Machine Plasma UV Cycle Air Purifier Disinfector

Description

Structure:

primary effect + medium effect + activated carbon + photocatalyst) composite filter.

High-pressure plasma or ultra-violet light tube

Working air duct

operating system

Working Principle:

Ultra-clean fan sucks the turbid air into the machine, remove the dust in the air by the composite filter. High pressure plasma through the machine to break down the bacterial decomposition in the flowing air, or choosing high-intensity UV sterilization.The clean air, which has been filtered out and sterilized, is sent out with a high concentration of negative ions.

Principle of sterilization

Adopt two methods to Kill and remove pathogenic microorganism by high intensity ultraviolet ( irradiation intensity ≥ 1800 μ W/cm ²) and filtering dust,

II. Killed microorganisms kinds

This unit has exterminate natural bacteria microbial in the air

Time of disinfection≥ 120min,elimination rate of natural bacteria ≥90%.

III. Application

It can be applied to the hospitals, public etc.

Installation requirements

NOTE:Don't install the unit above the patient bed.

• The installation height of this unit is 200cm above the ground , fixed on the wall by screws.
• The above and front of this unit is without any obstacles.
• Plug the cord into the power socket .

Usage

• Switch on the power, turn on the disinfection unit ,then Power indicator is light.
• Sterilization time(1h, 2h, 4h) is label on the control board ,''Run" indicator is light when choose the sterilization time.
• The unit is turn off automatically when is running to the preset time.

Usage Notes:

• Close the door and windows.
• Install and operate the unit according to the manual.
• Clean the UV lamp after Usage cumulative time is 1000 hours
• Operated by professionals .
• Sterilization time≥120min
• Surrounding space should keep clear, no object barrier.
• Move the unit carefully.
• Turn off the power and Pull out the power supply plug,when it is abnormal.

Main Performance Parameters

Daily Maintenance

• Clean the shell Must turn off power then twist dry a wet sponge or soft cloth(can add a little neutral detergent).
• Clean the lamp tube Operated by the professionals.