Active Member
|
[China]
Address: Floor 4,No.31,Yangmei Road,Yangmei Community,Bantian street,Longgang District,shenzhen,China
Contact name:Liu Yu
Shenzhen Vians Electric Lock Co.,Ltd. |
|
|
Access Control Signal Output 280Kg/600Ibs Single Door Electric Magnetic Lock
Products Specification
| Model | Size | Voltage | Current | Holding Force | Lock Signal | Door Signal |
| VI-280A | 250L*47W*26H |
12/24VDC | 12V/480mA 24V/240mA |
280kg(600Lbs) | No | No |
VI-280AS
| 250L*47W*26H | 12/24VDC | 12V/480mA 24V/240mA | 280kg(600Lbs) | No | Yes |
VI-280ADS
| 250L*47W*26H | 12/24VDC | 12V/480mA 24V/240mA | 280kg(600Lbs) | Yes | Yes |
VI-280B
| 500L*47W*26H | 12/24VDC | 12V/480mA*2 24V/240mA*2 | 280kg*2(600Lbs*2) | No | No |
VI-280BS
| 500L*47W*26H | 12/24VDC | 12V/480mA*2 24V/240mA*2 | 280kg*2(600Lbs*2) | No | Yes |
VI-280BDS
| 500L*47W*26H | 12/24VDC | 12V/480mA*2 24V/240mA*2 | 280kg*2(600Lbs*2) | Yes | Yes |
Products Note
1. Using powerful power supply, output voltage should be DC12V±10%,cable ＞0.75mm.
2. Don' hurt the galvanization layer during the installation.
3. Ensure the mounting plate well attach to the lock body.
4. The rubber ring must be added between armature plate and door leaf, don't fasten the screw tightly, keep the rubber ring elastic
5. Don't welded the mounting plate to the door, or will effect the lock.
6. Clean the slushing oil with cloth, don't use alkaline or pungent cleane
Wiring Instruction:
A: 12V DC Input:
Connect the ground(-) lead from a 12V DC power source to black wire of PCB.
Connect the Positive(+) lead from a 12V DC power source to red wire of PCB.
Set jumper for 12V DC operation.
B. 24V DC Input:
Connect the ground(-) lead from a 24V DC power source to black wire of PCB.
Connect the Positive(+) lead from a 24V DC power source to red wire of PCB.
Set jumper for 24V DC operation.
C. Wiring way to detect the door's condition:
When the input voltage is 24V DC, the flux through the wiring is lamp, remember not to overload.
If a NO signal of open and close, pls connect the wire to C and NO button.
If a NC signal of open and close, pls connect the wire to C and NC button.
FAQ
Q:What's warranty?
A: our Magnetic lock series we offer 5 years warranty.
Q:How do I pay for my purchase?
A: we accept the following payment methods: cridet card; moneybooker;T/T;.
Q:How much does it cost to ship to my country?
A:Please tell us your receive goods address, we will check the shipping cost for your reference
Q:Does this product come with retail package?
A: We have declared the packing detail on the description of each product, please check it, thank you!
Q:I am a reseller,I would like to buy many pieces of your item, what's the wholesale price?
A: Hi,thanks for your inquiry, if you would like to buy large quantity, please send email to us, we will give you the best price, thanks!
