Active Member
|
[China]
Contact name:
DEC Dongfeng Electric Machinery Co., Ltd. |
|
|
Eco Hydroelectric Power 3x28MW Hydro Turbine Generators
Introducton of Axial Flow Hydro Turbine
Axial-flow turbines are suitable for power stations with lower heads. Under the same water head, its specific speed is higher than that of a Francis turbine. The blades of the axial flow fixed-blade turbine are fixed on the runner body. The general installation height is 3-50m. , The blade setting angle cannot be changed during operation, the structure is simple, and the efficiency is low. It is suitable for power stations where the load change is small or the number of units can be adjusted to adapt to the load change.
Our typical HPP project references
| Turbine Type | Type | Model | Typical Performance |
| Francis | Tianhuaban HPP,Yunnan | HLD294-LJ-340 | Max. single installed capacity 99MW |
| SF99-28/6800 | |||
| GD3 HPP,Ethiopia | HLD892-LJ-245 | Max. running head Hmax=273m | |
| SF85-14/5000 | |||
| Shidi HPP , Chongqing | HLA551C-LJ-475 | Diameter of runner=4750mm Max. Foundation=9900mm | |
| SF60-56/9900 | |||
| Pangduo HPP, Tibet | HLD420D-LJ-318 | Highest altitude 4100m Head variation Hmax/Hmin=1.96 | |
| SF40-32/6800 | |||
| Axial-flow | Hongfa HPP, Guangdong | ZZD505A-LH-450 | Max.single installed capacity 50MW |
| SF50-32/6800 | |||
| Srepok4 HPP,Vietnam | ZZD471-LH-580 | Max. Diameter of runner D1=5800mm | |
| SF40-52/9000 | |||
| Bulb | Dafutan HPP,Hunan | GZB1000-WP-670 | Max.single installed capacity 40MW Max.Diameter of runner |
| SFWG40-70/7450 | |||
| Pelton | Nabang HPP, Yunan | CJ1085-L-170/6×14.8 | Max.single installed capacity 60MW |
| SF60-10/4100 | |||
| Nanshan1 HPP, Guangxi | CJA237a-L-165/4×10 | Max.running head Hmax=989.7m | |
| SF30-8/3100 |
Manufacturing capacity
Some cases
