donglongcharger 1500w electric forklift charger 12v 24v 36v 48v 60v 72v lead acid /lifepo4 battery charger for wholesale

donglongcharger 1500w electric forklift charger 12v 24v 36v 48v 60v 72v lead acid/ lifepo4 battery charger for wholesale

Brief description :

1500W electric forklift charger 12v 24v 36v 48v 60v 72v is suitable for lead acid & lifepo4 &gel &agm batteries 1ah to 800ah, The charger is not only suitable for electric forklift, it also can use on high power electric tools, electric vehicle, golf car, cruise car, electric tricycle etc. The battery charger with LED display show voltage and current, The voltage and current can be adjustment as your requirement.

Our electric forklift charger with multi-protection and led indicator, high efficiency and safety, that is good choose for your electric forklift and electric tools !

Feature : 

1. Aluminium case , light weight

2. Input voltage ; AC 100 V ~240 V  50 / 60 HZ

3. Max wattage : 1500W

4. Charge mode : 3 stage ( CC CV float mode )

5. Charging : High saturation and efficiency

6. Input plug(power cords) : EU US UK AUS Italy Plugs etc ( can be Customized)

7. Output Connector : DC jack, XLR, JST, Cigar Lighter, Alligator Clips etc

The 1500w electric forklift charger pictures as follows :

The 3-stage mode charging : 

First stage ( constant current ) : The charger will supply constant current for the battery

Second stage ( constant voltage ) : The voltage will be rising under the first stage, when it reach constant voltage value, it will turn into the second stage. The current will be slowly smaller until it reduce to floating value,the CV stage will end.

Third stage ( Floating charging ) : When the current is approaching the value of transition, the charger will cut down to the given current gradually, that means the battery power is full and indicator light turn to green. At this moment, the battery can be stopped charging or keep on trickle current charging for half an hour.

The 1500w 12v 24v36v 48v 60v 72v electric forklift charger specification :

Note: Cut-off point for Li battery is 5% of CC, and it can be setted between 3-10%.

Charging Procedure :

1. First output power charger wire ends are connected to the battery anode and cathode , the charge indicator turns green, the connection is correct, otherwise the charge in question, please check the actual situation.
2. Then city power plug to socket , the indicator is red, charger will be into the charging state .
3. When the indicator light turns to green, the battery is charged to 95% , If you want to reach 100% , keep charging for 1 to 2 hours before end of charge.
4. When fully charged, disconnect the city power first, then disconnect the battery cable.

Package & Delivery 

1. Package :  one piece one neutral box , 2 pcs/ carton, can be customized 

2. Delivery : 5 to 7 working days , big order according to actual quantity

3. Delivery port : Guangzhou port 

4. Payment term : T/T or Western Union 

5. Delivery way : by sea / by air / by express or as your requirement

For more information about our electric forklift charger or other electric tools chargers, welcome to contact us !