Oky Newstar Technology Co., Ltd |
|
1A Lithium Battery Charging module for Arduino , 4.5V - 5.5V Battery Charge Plate
1a lithium battery charge plate charge module lithium battery charger
Specifications:
1A dedicated lithium battery charging pad, charging module, lithium battery charger
1, Module Name: lithium battery charging plate
2, Charging current: 1A adjustable
3, Input voltage: 4.5V-5.5V
4, Charging indicator: red charging green full charge
5, Operating Temperature: -10 °C to +85 °C
6, Weight: 10g
7, Charging method: linear charge 1%
8, Charging accuracy: 1.5%
9, Full charge voltage: 4.2V
10, Input Interface: mini USB
11, Can reverse: can not reverse
12, External dimensions: 25 * 19 * 10mm
RPROG (k) | IBAT (mA) |
30 | 50 |
20 | 70 |
10 | 130 |
5 | 250 |
4 | 300 |
3 | 400 |
2 | 580 |
1.66 | 690 |
1.5 | 780 |
1.33 | 900 |
1.2 | 1000 |
Description / Note
1 test current ammeter can only
be connected in series at
the the 5V input end of the charging plate.
2. Charging
current best 0.37C of the battery
capacity is the capacity of 0.37 times, such
as 1000mAH battery charging current 400 so
that
enough. Over large chargingspeed effect poor, rushed the finished battery voltage out more!
The charging
connector wires can not be too small
and too long. Such connection resistance. Too
thin,
then rushed the finished battery voltage out more.
4 best contact connection with the battery is good. Or punch the finished battery voltage out more.
5. 5V input voltage is high, such
as 5.2 or
even 5.5 will result in insufficient charging
current 1000mA, this is normal. High
voltage chip the fever will automatically reduce thecharge
current, and not to chip burned. Chip
in about 60 degrees work fever is normal.
Competitive Advantage:
1. Convenient & Friendly Customer Service
2. Low Prices Direct From Factory Suppliers
3. Fast Delivery Around the World.
4. High Quality With Global Standards.
5. 1 Year Factory Warranty
6. Safe Shipping Way and Payment