Active Member
|
[China]
Address: Room1105, Block B, Chinto Technology Building, Minzhi Road, LongHua, ShenZhen city, GuangDong province, China
Contact name:Amy
Oky Newstar Technology Co., Ltd |
|
|
Educational Starter Kit For Arduino Learning Kit for Starters
Develop RFID System
Quick Detail:
1. This learning kit is easy for starters to develop RFID
system.
2. Using this learning kit, you can do 34 kinds of test with detail
manual.
3. This electronic kit educational using the latest control
panel UNO R3.
4. High Quality
5. Competitive Prices
6. Fast Delivery
First Let see the content of the Manual, then we will know what can
we do with this kit.
Specification:
| ARDUINO UNO R3 board | 1 |
| High quality and large bread board | 1 |
| RFID module | 1 |
| IC Keychain | 1 |
| Non-contact type IC card | 1 |
| I2C 1602 LCD module | 1 |
| 5V Relay | 1 |
| I2C 1602 LCD module | 1 |
| DS1302 clock module | 1 |
| Voice detection module | 1 |
| Temperature and humidity module | 1 |
| Level detection module | 1 |
| 4 * 4 keypad module | 1 |
| Three-color RGB module | 1 |
| XY joystick | 1 |
| XY joystick | 1 |
| Stepper motor driver board | 1 |
| Blue LED | 5 |
| Yellow LED | 5 |
| Red LED | 5 |
| 1k resistor | 5 |
| 10k ohm resistor | 5 |
| 220 ohm resistor | 8 |
| Buzzer | 2 |
| Key module (with hat) | 4 |
| Key module (with hat) | 2 |
| LM35 sensor module | 1 |
| Photoresistor | 3 |
| Fire | 1 |
| Infrared receiver | 1 |
| Infrared receiver | 1 |
| A digital control | 1 |
| 4 digital tube | 1 |
| 8 * 8 dot matrix module | 1 |
| 8 * 8 dot matrix module | 1 |
| Infrared remote control | 1 |
| Infrared remote control | 30 |
| Male to Female DuPont lines | 30 |
| 9 volt battery snap | 1 |
| USB Cable | 1 |
Summary of 2012 UNO R3 Board
Microcontroller | ATmega328 |
Operating Voltage | 5V |
Input Voltage (recommended) | 7-12V |
Input Voltage (limits) | 6-20V |
Digital I/O Pins | 14 (of which 6 provide PWM output) |
Analog Input Pins | 6 |
DC Current per I/O Pin | 40 mA |
DC Current for 3.3V Pin | 50 mA |
Flash Memory | 32 KB (ATmega328) of which 0.5 KB used by bootloader |
SRAM | 2 KB (ATmega328) |
EEPROM | 1 KB (ATmega328) |
Clock Speed | 16 MHz |
Photos:
