Results fordistribution cabinet test probefrom 11681 Products.
|
|
Wedge Probe For Document Shredder The wedge probe is one of two new accessibility probes required by UL 60950 for paper shredders. UL found that children and small women could ...
|
|
|
|
|
Wedge Probe For Document Shredder The wedge probe is one of two new accessibility probes required by UL 60950 for paper shredders. UL found that children and small women could ...
|
|
|
|
|
UL 60335-2-24-Figure 101.DVA.1 – Articulate probe with flat and cone shaped hand 3.5 – 4.5 year age Notes: 1 – The probes were designed with a center pin to rotate the hand with ...
|
|
|
|
|
IEC61010-031 Single Probe Cable Rotational Flexing Tester The patent discloses a watch probe cable tensile torsion wear-resistant testing machine, including a testing machine shell...
|
|
|
|
|
UL Enamel Wire Probe 25 Usage: This probe is use to checking access to enamel coated wire accord to UL standard requirement. stainless steel with stainless stell handle.
|
|
|
|
|
IEC 60529 Test Sphere50mm , IP1X This probe is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection against ...
|
|
|
|
|
IEC 60950 Figure 2C / IEC62368-1 Figure V.3 Blunt Probe Testing the Limited Access to Telecommunications Voltages The Blunt probe is required in IEC62368,IEC 60950,IEC 60065, UL ...
|
|
|
|
|
UL Standard Articulated Jointed Test Finger For Preventing The Finger From Approaching To The Hazardous Parts Test Finger Length: 234mm The Bending Part Length: 30/30/40mm The UL ...
|
|
|
|
|
Wedge probe IEC62368-1-Figure V.4 Reference Standard: IEC62368-1-Figure V.4 Calibration Certificate:Figure V.4 Wedge probe.pdf Technical Parameters: Test finger length 234mm ...
|
|
|
|
|
UL1005 Electric Flatirons -Figure 7.1 Probe 7.7 An opening in the enclosure of a flatiron located within 1 in (25.4mm) of the soleplate surface is acceptable if the probe ...
|
|
|
|
|
Temperature-measuring and accessibility probe-UL923 Figure 37.1 37 Surface Temperature Tests 37.1 General 37.1 .1 An appliance employing a resistance-type element, such as a ...
|
|
|
|
|
IEC 62368 Test Equipment.IEC 62368-1 TESTING AND MEASURING EQUIPMENT No. Items Description 1 Temperature and humidity chamber IEC62368-1-cl.4.1.4 Model:KP-HWS1000L 2 Test Apparatus ...
|
|
|
|
|
Test Rubber Ball Usage rubber ball used for dynamic stability testing to UL (USA) standards. A ball, 2 and 3/4/16 inch diameter (2.187 inches), filled with No. 60 core sand. It is ...
|
|
|
|
|
IEC 62368 Test Equipment.IEC 62368-1 TESTING AND MEASURING EQUIPMENT No. Items Description 1 Temperature and humidity chamber IEC62368-1-cl.4.1.4 Model:KP-HWS1000L 2 Test Apparatus ...
|
|
|
|
|
IEC 62368 Test Equipment.IEC 62368-1 TESTING AND MEASURING EQUIPMENT No. Items Description 1 Temperature and humidity chamber IEC62368-1-cl.4.1.4 Model:KP-HWS1000L 2 Test Apparatus ...
|
|
|
|
|
UL 60335-2-24 Figure 101.DVA.2 Articulate probe with flat and cone shaped hand 10.5 – 11.5 year age Notes: 1 – The probes were designed with a center pin to rotate the hand with ...
|
|
|
|
|
UL507-Figure 8.2 Probe For Fan Impellers And Other Moving Parts Of Stationary Fans UL507-figure 8.2 Probe for fan impellers and other moving parts of stationary fans and fans ...
|
|
|
|
|
Wedge probe , IEC 62368-1 Figure V.4 – Wedge probe According to standard: IEC62368-1 Material :heat-treated steel Length :300mm Width :50mm Bendable Section :30/30/40mm Calibration ...
|
|
|
|
|
Antenna coaxial sockets mounted on the apparatus Antenna coaxial sockets mounted on the apparatus and incorporating parts or components which isolate HAZARDOUS LIVE parts from ...
|
|
|
|
|
Diameter 60mm Test Rod , EN 60335-2-30 Surfaces that are accessible to the test rod Product Description: 1. According To Standard: EN 60335-2-30 2. It is used to the protective ...
|
|
|
You may also be interested in :
