Home Companies Xi'an Desun Uniwill Electronic Technology Co., Ltd.

POM Materials Multiparameter Water Quality Sonde Sludge Concentration

Xi'an Desun Uniwill Electronic Technology Co., Ltd.

Contact Us

[China] country

Trade Verify

Address: Room 502, Unit 2, Building 1, Yi Cui yuan i city, No. 11, Tangyan South Road, Yanta District, Xi'an city, Shaanxi Province, China.

Contact name:Wang

Inquir Now

Xi'an Desun Uniwill Electronic Technology Co., Ltd.

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

POM Materials Multiparameter Water Quality Sonde Sludge Concentration

Country/Region china
City & Province Shaanxi
Categories Other Plastic Products
InquireNow

Product Details

multi-parameter sensor can integrate up to 11 parameters salinity/nh4/pH/COD/TSS/TDS/turbidity/sludge concentration/oil 

Product Description

Overview

Our company has launched the latest online multi-parameter (all-in-one) water quality sensor with integrated design, which is reliable and easy to use. A maximum of 6 digital sensors can be connected at the same time. Fluorescent dissolved oxygen sensor, four- electrode conductivity sensor, turbidity sensor, digital pH electrode, blue-green algae and chlorophyll sensor can be selected at the same time. RS485 output, equipped with automatic cleaning device, greatly reducing maintenance costs, each sensor is equipped with quick-plug waterproof connector. Compared with traditional shore-type meters, installation is more convenient and can more directly reflect the real data on the spot.

 
Features
* Digital sensor, RS485 output, support MODBUS
* All calibration parameters are stored in the sensor, and each probe has a waterproof connector for easy insertion and removal.
* Equipped with automatic cleaning device, it can effectively remove the surface contamination of the sensor,
prevent the growth of microorganisms, more accurate and lower maintenance.
* Alternatively luminescent dissolved oxygen, four-electrode conductivity, optical turbidity, the pH digital, digital ORP, chlorophyll , oil in water and ammonia nitrogen
* Sensor for long-term online monitoring.
* The all-in-one design allows for the simultaneous
connection of six probes and seven parameters.
 
 
Technical parameters
Production Name
Specifications
 
Optical dissolved
oxygen probe
Range
0-20mg/L or 0-200% saturation
Precision
±0.3mg/L
Resolution
0.01mg/L
 
 
Fiber turbidity probe
Range
0~1000 NTU
Precision
<5% or 0.3NTU
Resolution
0.1NTU
 
Four-electrode conductivity
Range
1uS/cm-200mS/cm
1uS/cm-100mS/cm
Precision
1% FS
Resolution
0-1000uS/cm: 0.1uS/cm;
1mS/cm-100mS/cm: 0.1mS/cm
 
 
Chlorophyll probe
Range
0~400 ug/L or 0~100RF
The detection limit
0.1 μg/L
Resolution
0.1 μg/L or 0.1% RFU
 
 
Digital pH probe
Range
0-14pH
Precision
±0.1pH
Resolution
0.01
 
Digital ORP probe
Range
-999~999mV
Precision
±20mV
Resolution
1mV
 
Oil in water water
Range
0-20ppm or 0-50ppm
Precision
1%
Resolution
0.1ppm
 
Ammonia nitrogen probe
Range
0~1000mg/L
Precision
±10%
Resolution
0.1mg/L
 
 
 
 
 
Multi-parameter sensor
other information
Operating temperature
0~50°C
Output
RS485
Automatic cleaning brush
Yes / Optional
powered by
12Vdc±5%
Current
100mA
Protection level
IP68
Cable length
10m, 5m, 15m and 30

 

 

 

Maintenance schedule

DS2100 the all-in-one water quality sensor is equipped with a cleaning brush to extend maintenance intervals. However, due to the diversity of the environment, regular inspections, cleaning and calibration of the sensors are recommended.

 

Maintenance tasks,Recommended maintenance frequency
Cleaning the sensorDepending on the use environment
Calibration of sensors (if required by the competent authority)Periodic sensor calibration

 

Maintenance method

Sensor maintenance

  • Check: Check the sensor head for dirt and microorganisms, whether the casing and sensor surface are damaged, whether the cable is normal, whether the test data is normal, and whether the consumables are damaged.
  • Cleaning: Use tap water to clean the outer surface of the sensor. If debris remains, wipe it with a moist soft cloth. For some stubborn dirt, you can add some household washing solution to the tap water to clean it.
  • Calibration: Perform single or two-point calibration on the sensor. Select the appropriate standard solution according to the corresponding sensor.
 

Precautions

The probe contains sensitive optical and electronic components. Make sure that the probe is not subject to severe mechanical impact. There are no parts in the probe that require user maintenance.

 

Frequently Asked Questions

 

 

ErrorPossible causesSolutions
The operation interface cannot be connected or the measurement results are not displayedController and cable connection errorReconnect the controller and cables
Cable failurePlease contact us
Measured values are too high, too low, or the values remain unstableDirt and microorganisms on the sensorDirt and microorganisms on the sensor

About Us

Xi'an Desun Uniwill Electronic Technology Co., Ltd (Hereinafter referred to as Disen Sensing Company) is located in Xi'an High-tech Development Zone. It is a high-tech company integrating production, R&D, sales and engineering services. Relying on Xi'an's rich high-tech resources, we have carried out technical cooperation with many universities and scientific research institutions, constantly breaking through technical barriers, improving product performance, and using leading technology to provide high-quality products for the water quality monitoring industry.

We launched a wireless water quality monitoring solution based on the current rapid development of the Internet of Things technology, combining smart terminals and traditional display units through wireless transmission to achieve real-time dynamic water quality monitoring functions such as data cloud display, remote cloud control, and upper and lower limit alarms.

 

Company philosophy

We are committed to the water quality monitoring industry, actively innovating and improving products, and optimizing industry application solutions. We take technology and quality as the cornerstone, honesty and service as the foundation, do a good job of water quality monitoring with our heart, and contribute to the development of the water quality monitoring industry. power. At present, the products are sold to more than 30 countries and regions overseas, and they have established their own sales network locally, cooperate with after-sales and maintenance personnel, and continue to supply water body monitoring equipment.

In 2021, we will further increase the proportion of the domestic market on the basis of innovating high-quality products and improving technical services. Increase the after-sales maintenance force in first-tier cities to provide customers with timely and effective products and services.

service

* Standardized workshop and process
* Strict professional quality inspection
* Return is supported if the product is unqualified.
* Fast delivery
* Warranty for 1 years

 
FAQ

Q: Is your company a manufacturer??
A: Yes,we are a professional manufacturer of online water quality monitoring products: oil in water sensor/ DO sensor/ NH4-N sensor / ORP / COD sensor / Blue-green algae sensor /Conductivity sensor /TDS / TSS /MLSS,ect.
Q: What parameters do you need for product selection?
A: Application, Range, Power supply and Output signal.
Q: How about the quality of the managements?
A: We have a complete quality control system, our products will be fully pre-inspection before shipping to you. We have the certification of ISO, CE, we could send the certification test of our company to you.
Q: Can you offer OEM services?
A: Yes,we support OEM and ODM products according to your requirements.
Q: What are your terms of payment and delivery time?
A: We could accept T/T, Paypal, Western Union, Credit Assurance. Generally, we will arrange the shipment within 7 days after received payment.
Q: How about warranty?
A: 12 months warranty

Hot Products

Multi-parameter sensor can monitor COD/BOD/TOC/TSS/turbidity/EC/ORP/pH/DO/TDS/Salinity/nh4/no3 etc. ...
DS2100 Portable Multi Parameters Water Quality Analyzer Ph EC Turbidity DO Monitoring Sensor Probe ...
multi-parameter sensor can integrate up to 11 parameters salinity/nh4/pH/COD/TSS/TDS/turbidity...
DS2100 Industrial Multi-parameter Water Quality Instrument pH DO EC Turbidity Ammonia Monitoring ...
Water treatment sensor water meter rs485 modbus multi-parameters monitor water quality detector ...
Online Total Suspended Solids Sensor For Waste Water Treatment Products Description Principle The ...