Product | Fiber optic TSS sensor | Self-cleaning Fiber optic TSS sensor |
Model | DS450 | DS451 |
Principle | 90° scattered light |
Range | 0 to 1000 mg/L The range needs to be customized |
Precision | 0.1NTU |
Resolution | <3% |
Protection level | Ip68 |
Output signal | Support RS-485, MODBUS protocol |
Installation | Submersible type, Circulation type |
Power supply | DC 5~12V, current <50mA (when not cleaned) |
Size | Φ45*175.8 mm |
Probe cable length | 10 meters (default), can be customized |
Housing material | POM, SS316 |
Optical window | Have |
Self-cleaning system | No | Have |
Cable information
4 wire AWG-24 or AWG-26 shielding wire. Turbidity=5mm
1, red line - power supply (VCC)
2, white line - 485 data _B (485_B) 3,
green line --- 485 data _A (485_A) 4,
black line --- ground (GND)
5, bare line---- shielding layer
Maintenance methods
Sensor maintenance
1) Sensor outer surface: Clean the outer surface of the sensor with
tap water. If there isstill
debris left, wipe it with a soft, damp cloth.
For some stubborn dirt, some household washing liquid can be added
to the tap waterfor
cleaning.
2) Check the cable of the sensor: The cable should not be tightened
during normaloperation,
otherwise the internal wires of the cable may be broken and the
sensor may not work
properly.3) Check if the sensor's measurement window is dirty .
4) Check the sensor housing for damage.
Notice: The probe contains sensitive optical and electronic components.
Make sure the
probe is not subject to severe mechanical shock. No need inside the
probe
The part to be maintained by the user.
Install
Before installation, please check the appearance of the cables for
damage, and disperse the
cables.
1. When using the throw-in sensor, avoid the sensor hitting the
wall or other facilities
caused by water flow. If the water flow rate is too fast, the
sensor must be fixed.
2. There should be no obstructions in front of the measurement. For
example, fluorescence
sensors should be avoided from light.
Company Information
Xi'an Desun Uniwill Electronic Technology Co., Ltd (Hereinafter
referred to as Disen
Sensing Company) is located in Xi'an High-tech Development Zone. It
is a high-tech
company integrating production, R&D, sales and engineering
services. Relying on
Xi'an's rich high-tech resources, we have carried out technical
cooperation with many
universities and scientific research institutions, constantly
breaking through technical
barriers, improving product performance, and using leading
technology to provide
high-quality products for the water quality monitoring industry.
We launched a wireless water quality monitoring solution based on
the current rapid
development of the Internet of Things technology, combining smart
terminals and
traditional display units through wireless transmission to achieve
real-time dynamic
water quality monitoring functions such as data cloud display,
remote cloud control,
and upper and lower limit alarms.
Services
* Workshop and process standardization
* Strict expert quality control
* If the product does not satisfy, the return is also supported.
* Quick delivery
* Guarantee for 1 year
Q: Is your company a manufacturer??
A: Yeah, we are a manufacturer of professional online water quality
monitoring products: Oil in water sensor / Dissolved oxygen sensor
/ pH sensor / NH4-N sensor / ORP/COD sensor / Blue-green algae
sensor / Conductivity sensor / TDS / TSS / MLSS,TOC,etc.
Q: How about the quality of the managements?
A: We have a complete quality control system, our products will be
fully pre-inspection before shipping to you. We have the
certification of ISO, CE, we could send the certification test of
our company to you.
Q: What are your terms of payment and delivery time?
A: We could accept T/T, Paypal, Western Union, Credit Assurance.
Generally, we will arrange the shipment within 7 days after
received payment.