Disposable Folding FFP2 Mask / Fold Flat Dust Mask For Pollution
District
1 . Descriptions
FFP2 Respirator Mask with 4-ply non-woven/elasticated strap , fold flat dust mask
,convenience take/packing: neutral color box, also can
OEM/disposable dust mask with valve/protect against dust and liquid
Active carbon is better for odour and hot working condition.
Product Name | Respirator mask |
Material | Non woven fabric |
Type | Earloop |
Style | With valve or without valve |
Application | Construction, mining,textile |
Feature | Nose bar adaptable,hypoallergenic |
FFP2 Dust Mask Advantages
1. FFP2 dust mask has a better design
2. Dual fixed straps, adjustable metal nose band
3. Smooth inner lining ensuring a secure seal.
4. Loaded polypropylene material without any toxic, irritating,
stimulant, poison
5. High filtration and static electricity material to resist normal
toxic and ting micron particle.
2 . How to use?
- Cup respirator in one hand with nosepiece at fingertips,allow
headbands to hang freely below hand.
- Hold respirator under chin,with nose piece up
- Locate the upper strap across the crown of the head and the lower
strap below the ears.
- Strap must not be twisted
- Using both hands,mould nose clip to the shape of the lower part of
the nose to ensure a close fit and good seal.Pinching the nose clip
using only one hand may result in less effective respirator
peformance.
- The seal of the respirator on the face should be fit-checked before
entering the workplace.
- If the user feels the bottom strap is too loose and it is not
possible to achieve a satisfactory fit of the mask a knot can be
tied in the strap.
![](http://img.everychina.com/nimg/9c/01/af8c0a334e9aa3813afd3e1363d8.jpg)
![](http://img.everychina.com/nimg/74/5f/647a4eae71dab99d9d324d7339f2.jpg)
3. Warning
- The user should be trained in the fitting and should be aware of
the instructions for using prior to donning the respirator.
- Use in adequately ventilated areas,which are not deficiency of
oxygen.
- Do not use this respirator when oxygen concentration is less than
19.5%.
- Do not use the mask in explosive environment.
- The mask must be fitted correctly to ensure the level of protection
expected is achieved.
- The facila hairs or heards and certain facial charactrtistics may
reduce the effectiveness of the mask.
- For mask mark marked “NR”,the particle filtering half mask shall
not be used for more than one shift.
4. Discard and replace the mask if:
- The mask is removed whilst in the contaminated area.
- Clogging of the respirator causes breathing difficulties.
- The mask becomes damaged.
- For respirators protecting against vapours,the smell of vapours
present becomes derectable.