FFP2 Disposable Protective Face Mask Non Woven Material Anti Pollution

FFP2 Disposable Protective Face Mask Non Woven Material Anti Pollution

Meet the requirements of EN149 NIOSH with a filtration efficiency of at least 95%. High quality filter media with advanced static-charged microfibers helps to make exhalation easier and inhales, thus enhancing the comfort of everyone.The lightweight construction improves comfort during use and increases wear time.

Points for Attention:
1. This product is prohibited to be used with damaged package;
2. Do not use in atmospheres containing less than 19.5% oxygen, as this respirator does not supply oxygen;

Not for use in oil mist atmospheres;
3. If the product becomes damaged, soiled, or breathing becomes difficult, leave the contaminated area immediately and

replace the product;
4. This product is one-time use only and can not be washed;
5. This product should be stored in a clean, dry and ventilated environment with relative humidity less than 80% and without

  harmful gas

★ Single-use

★ Without glass fibers

★ Very low resistance to breathing

★ Nose bar adaptable

★ High filtration capacity: filter penetration at least 94% of airborne particles.

★ Perfect fitting

★ CE; EN149:2001 certified.

★ Designed to protect the wearer from inhaling harmful dusts; fumes; vapors; and gases.

★ Respirators come in a wide range of types used by the military; private industry and the public.

Directions for use

• The mask is for single use only.
• The mask should not be removed from its packaging until its required for use.
• Use the respirator in accordance with applicable health and safety regulations.
• Fit the respirator and check leak-tightness before entering the contaminated area.
• Wear the respirator for the whole duration of exposure to contaminants.It should not be used for more than 8 hours continuously and should be discarded after use.
• Transport and stockage of unused masks should be such that the product is not stored in direct sunlight and in frost free conditions,not in contact with solvents and cannot be damaged by physical contact with hard surfaces/items.
• As required by European Health and Safety requirements,the user is advised that when the mask is in contact with the wearer’s skin,it may cause allergic reaction to susceptible individuals.If this is the case,leave the hazard area,remove the mask and seek doctor’s advice.​