Zhengzhou Baiyun Industrial Co., Ltd. |
|
Honda Brands Drum Brake Linings With IATF16949 Quality System
Character of the motorcycle brake lining of BAIYUN
1. Hight strength
2. Heat resistance
3. Wear-resistance
5. No noise
6. Good stability
7. Factory direct sell.
8. Products can be manufactured as your request .
9. OEM or ODM is acceptable.
Data of BAIYUN Motorcycle Brake Linings
Product name | Brake Lining |
Brand | BAIYUN |
Packaging | Plastic bag + Carbon box |
Sample | Acceptable |
Motorcycle Brand | Honda / Yamaha |
Material | NAO, Matellic, Rubber |
Our Services
1,Durable and High Quality.
2,Good-looking packing.
3,Prompt delivery.
4,Wide range of parts available.
5,OEM production welcome
6,Most competitive wholesale prices.
Specification
1.The whole body is made of steel
2.Manual welding and polishing
3.Different tube size and thick optional
4.Never have crack and leakness problems
1, Definition of Vehicle Brakes
Automobile brake pad refers to the friction material fixed on the
brake drum or brake disc that rotates with the wheel, in which the
friction lining and friction lining block bear external pressure
and produce friction effect so as to achieve the purpose of vehicle
deceleration.
The braking principle is mainly from the friction, using the brake
pad and brake disc (drum) and the friction between the tire and the
ground, the kinetic energy of the vehicle into the heat after the
friction, the car will stop.A good and efficient braking system
must be able to provide stable, adequate and controllable braking
force, and have good hydraulic transmission and heat dissipation
ability, to ensure that the driver from the brake pedal applied
force can be fully and effectively transferred to the main pump and
sub-pump, and to avoid high heat caused by hydraulic failure and
brake recession.There are two major types of brake systems, disc
and drum, but apart from the cost advantages, drum brakes are far
less efficient than disc brakes.
2, Kinds of Vehicle Brakes
1), Commercial Vehicle Brakes:
Commercial Vehicle---Drum Brake Linings
Commercial Vehicle---Disc Brake Pads
2), Passenger Car Brakes:
Passenger Car---Drum Brake Linings
Passenger Car---Disc Brake Pads
3), Motorcycle Brakes:
Motorcycle---Drum Brake Linings
Motorcycle---Disc Brake pads
3, Brake Performance
1). Braking performance: friction coefficient (FF level: 0.35-0.45)
braking force: braking force, braking sensitivity
2), wear resistance: wear rate (6-100,000km) wear resistance.(with
driving habits, road conditions, climate, brake disc material
(different models, brake disc material is different, the weight of
the car is different)).
3). Comfort: whether there is noise, whether there is a sense of
braking, whether it is smooth.
4). Thermal recession: whether it is heat resistant -- the degree
of thermal recession.
5). Shear strength: whether it falls off, whether it is easy to
break, the density, whether the density is balanced, whether there
are bubbles and gaps.
Other items: whether damage brake disc, whether waterproof - water
recession degree, whether environmental protection, and brake disc
fitting degree.
4, Factors affecting product quality/performance
1). Formula and materials:
a. What kind of materials are included in the recipe?Is the ratio
of various materials in the formula scientific and reasonable?There
are dozens of commonly used materials such as: Arron, copper fiber,
ceramic fiber, carbon fiber, synthetic graphite, six titanium
potassium acid whisker, powder nitrile, antimony sulfide, etc
b. Purity and quality of materials purchased by the company
2). Components:
The quality of the components used, such as the disc brake sheet's
steel back and muffler, also affects the performance and quality of
the entire brake pad.
3). Processing technology:
a. Control management and protection of materials and components.
b. Pressing effect of pressing process, pressing pressure, whether
it is equal ratio pressing, pressing temperature and duration, etc.
c. Whether the heat treatment temperature and time are appropriate,
and whether the grinding process is fine and standardized.
d. Procedures such as sandblasting and polishing, adhesive coating,
marking and packaging, and control of semi-finished products and
finished products
5, Brakes Production process
1). Production process of drum brake linings for commercial
vehicles:
Stir ingredients -- -- -- -- -- - > pressure molding (pressing
blank + pressure molding) -- -- -- -- -- -- -- -- -- -- -- - >
> heat treatment chamfering, grinding inside arc -- -- -- -- --
- > -- -- -- -- -- - > drilling grinding outer arc rubbing
surface -- -- -- -- -- - > brush ash printed label -- -- -- --
-- - > thermoplastic packing -- -- -- -- -- - > artificial
packing packaging
2). Production process of disc brake pads for passanger cars:
Ingredients stirring + polishing of the steel back -- -- -- -- -- -
> glue -- -- -- -- -- - > pressure molding - -- -- -- -- --
-- -- -- -- -- - > > heat treatment friction surface
grinding, chamfering, slot -- -- -- -- -- - > spray painting --
-- -- -- -- - > the silencing pills -- -- -- -- -- - >
surface coated -- -- -- -- -- > spring, three jaw -- -- -- -- --
- > thermoplastic packing -- -- -- -- -- - > artificial
packing packaging
3). Production process of disc brake pads for commercial vehicles:
Ingredients stirring + polishing of the steel back -- -- -- -- -- -
> glue -- -- -- -- -- - > pressure molding - -- -- -- -- --
-- -- -- -- -- - > > heat treatment friction surface
grinding, chamfering, slot -- -- -- -- -- - > spray painting --
-- -- -- -- - > laser marking loading -- -- -- -- -- - >
spring -- -- -- -- -- - > thermoplastic packing -- -- -- -- -- -
> artificial packing packaging
6, Advantage of Baiyun Brakes
1). Excellent formula. Various formulas are suitable for different
models and road conditions
2). Equipped with commercial vehicle bench test bench and passenger
vehicle bench test bench, 1:1 simulated real brake friction
performance test, each formula and product for strict testing.
3). Automatic large scale batching system with accurate
matching.Ensure uniform quality of ingredients.
4), the equal ratio press presses, presses the finished product
density unification, the quality is consistent.
5), automatic unmanned operation press, automatic packing and steel
back, automatic flattening, automatic pressing, eliminate the error
rate of manual operation, to ensure the quality of finished
products.
BAIYUN STORY
WHY CHOOSE BAIYUN
FAQ
Q1. What are your terms of packing?
A: Generally, we pack our goods in carton box and pallet, suitable
for shipping container.
Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the
photos of the products and packages before you pay the balance.
Q3. What are your terms of delivery?
A: EXW, FOB, CFR, CIF.
Q4. How about your delivery time?
A: Generally, it will take 45 to 60 days after receiving your
advance payment. The specific delivery time depends on the items
and the quantity of your order.