15 Ton Cable Heavy Load Electric Ferry Transfer Cart Transporting
Cargo
Description
BTL series electric transporter dolly permit the 380V alternating
current get in the electric control system directly and then drive
the motor to make it start, stop, move forward and move backward.
The cable lies in the middle of the two rails and the working
voltage is safe 36V. It can be used in high temperature and
explosion proof environment. It's usually used for short distance
transportation.
Features of Ferry Transfer Cart
---- Low noise It causes low noise level.
---- Maximum safety Offers guarantee of maximum safety for operators and for the
material handled. We really care about the safety of everyone
involved in the job.
---- Easy for operation These transfer carts are easy to drive, so as soon as you get it
you will be able to use it to transport your loads. We will support
you to make the best out of your heavy load transporter.
---- Easy to implement into manufacturing process Operates on standard floors; Do not require complex or permanent
installation
---- Suitable for All Kinds of Weight The battery powered trolley is superb for handling both small and
extremely huge loads for its modular fabrication and its high
payloads: up to 300 ton for each trolley.
Site map for customer useSite map for customer useail Trailer Rail
Trail
Model | BTL-2t | BTL-20t | BTL-50t | BTL-100t | BTL-150t |
Rated Load(t) | 2 | 20 | 50 | 100 | 150 |
Table Size(mm) | Length(L) | 2000 | 4000 | 5500 | 6500 | 10000 |
Width(W) | 1500 | 2200 | 2500 | 2800 | 3000 |
Heigth(H) | 500 | 600 | 700 | 1000 | 1200 |
Wheel Base(mm) | 1200 | 2800 | 4200 | 4900 | 7000 |
Rail Inner Gauge(mm) | 1200 | 1435 | 1435 | 2000 | 2000 |
Wheel Diameter(mm) | 270 | 350 | 500 | 600 | 600 |
Wheel Quantity | 4 | 4 | 4 | 4 | 8 |
Ground Clearance(mm) | 50 | 50 | 50 | 75 | 75 |
Running Speed(min) | 0-25 | 0-20 | 0-20 | 0-20 | 0-18 |
Motor Power(kw) | 0.8 | 2.5 | 5.5 | 11 | 15 |
Running Distance(m) | 25 | 30 | 50 | 50 | 50 |
Max Wheel Load(KN) | 14.4 | 77.7 | 174 | 343.8 | 265.2 |
Reference Weight(t) | 2.5 | 5.6 | 7.8 | 14.1 | 26.2 |
Recommended Rail Model | P15 | P24 | P43 | QU100 | QU100 |
Production Process of Ferry Transfer Cart
CNC Cutting
Transport the steel plate from raw material warehouse to CNC
cutting workshop for cutting. After the cutting, the workers will
do some simple processing such as chip moving and setting out.
Preliminary Assembling
Put the cut steel plate together according to the design drawing
Welding
Weld the steel plate with automatic welding machine after the
preliminary assembling
Post weld treatment
Test the welding section after the welding, polish and burring.
Post weld treatment to eliminate welding stress
Spray Primer
Transport the structure part after processing to painting booth for
spraying primer. The main component of the primer is zinc rich
epoxy antirust paint. The primer is to two layers
Assembling
Assemble the structure parts after spraying primer with wheels,
motors and gear box, etc.
Paint finish
Transport the assembled cart to painting booth, inspect the
integrity of primer. After that paint the finish
Debugging
Debugging the cart after painting the finish with electric control
system, after the debugging, the cart will test without load. And
after the no load test, the cart will be tested with load. After
the inspection, the cart will be transported to storage area.