Active Member
|
[China]
Address: No. 1, Xinglong 2nd Road, Guanglong Industrial Zone, Chencun Town, Shunde, Foshan, China.
Contact name:Wayne Xie
Guangdong Sunkings Electric Co., Ltd |
|
|
250Kw Gas Generators AC Three Phase 1500Rpm 50Hz Biogas, Natural Gas Genset
TECHNICAL DATA
| Genset model | SWG344 |
Genset Rated Power Genset Standby Power | 250KW / 313KVA 275KW / 344KVA |
| Rated voltage | 400/230V (adjustable) |
| Rated current | 450 Amps |
| Frequency | 50 Hz |
| Power factor | 0.8 Lagging |
| Connecting type | 3 phase 4 wire |
| Cooling system | Closed cycle water-cooled with fan, water tank |
| Overall dimension (L×W×H) mm | 3000×1000×1750 |
| Gross weight (kg) | 3100 |
| Diesel Engine | |
| Brand | WEICHAI |
| Model | WP13D317E200NG |
| Engine type | 6 cylinders in Line, 4 stroke, direct injection |
| Aspiration | Turbocharged and air-to-air intercooled |
| Rotating speed | 1500 RPM |
| Speed governing system | Electronic speed governor |
| Starting method | By 24V batteries |
| Engine filter system | Dry type air filter ,fuel filter, oil filter, water filter |
| Displacement(L) | 12.54 |
| Bore×Stroke(mm) | 127×165 |
| Compression ratio | 11.6:1 |
| Ignition Order | 1-5-3-6-2-4 |
| Alternator | |
| Brand | FARADAY |
| Model | FD4M1-4 |
| Excite type | Brushless self-excited AVR regulation |
| Connecting type | 3 phase 4 pole |
| Steady frequency change | 0.50% |
| No load voltage | ≥95%-105% |
| Steady voltage | ≤±1% |
| Insulation class | Class H |
| Protection grade | IP23 |
FEATURES
1. Deutz technology platform ,WoodWard high reliability components
and control strategy.
2. In-line, water-cooling, wet sleeve, electronically controlled
pre- mixing, sparking plug ignition,electric starting.
3. Closed-loop control and intelligent feedback make the control
more accurate.
4. lntelligent fault diagnosis,Engine safety and protection,Knock
monitoring.
APPLIED GAS:
Natural Gas, Biogas, City Sewage Gas, Landfill gas, Oil gas, Farm
biogas, Coal mine gas,etc
Acceptable fuel gas pressure: 5~12kPa
CH4 content: for natural gas≥85% CH4 ,content:for biogas≥40%
Gas heat value≥5500kcal/Nm3 (23MJ/Nm3 ). Gen set output power will
increase as the gas heat value increase, if use low heat value gas
for fuel (Heat value<5500kcal/Nm3, it will lower the power
efficiency.
Gas does't include free water or free materials (the size of
impurities should be less than 5μm.)
H2S content≤200mg/NM³
NH3 content≤20mg/NM³
Impurities content≤30mg/NM³;size≤5μm
Water content≤40g/NM³, no free water.
