350mm Diamond Core Drill Bit , Drilling 1 Inch Core Drill Bit

Supply 16-370mm High Performance Diamond Core Bits

Diamond Water Drills For Drilling And Coring From Concrete Wall Etc.

Blade Type: RTM-TCD-021

Image Sample Specification:

• 16-200mm *  370/350mm  (Diameter x Full Length)

Processing Applications of Diamond Saw Blade: 

• Suitable for drilling and coring on concrete wall and concrete floor.

• Suitable for wet drilling.

Main Features of Diamond Cutting Blade:

• Fast Speed

• Smooth Cutting

• Not Easy To Break

• Long Service Life

• Low cost

Different sizes and types availbale here:

• Yellow, blue and red colours availabe 

• Different sizes availble 

• Different Patterns available

The company can customize all kinds of products according to customers' needs, and establish detailed customer files to ensure customers' needs. Our company will strictly abide by this commitment and related contracts, fulfill the responsibilities and obligations!

Features of Diamond Blade:

• Excellent drilling ability and high wear resistance ensure long service life of the diamond coring bits.

• The high hardness of the binder makes the segments have the characteristics of high rigidity, so that the blade will not deform in the cutting process, so as to ensure the perpendicularity of the cutting surface.

• Through the fine adjustment of abrasive concentration and particle size, it can meet the requirements of cutting surface finish and has good cutting efficiency.

• Advanced and scientific processing means and strict process control ensure the high accuracy of blade shape and position.

• The accurate classification of binders can meet the requirements of selecting special coring bits for processing different materials.

• Low cost water drills to save money for large quantity preocessing.

More Pictures of Diamond Coringing Bits/Diamond Coring drills:

Brief Introduction of Different Bonded Type of Diamond Blades:

• Resin bonded diamond series: resin bonded diamond and cubic boron nitride grinding wheels are abrasive tools and tools of various shapes made of diamond or cubic boron nitride and resin bonded.

         Features: high grinding efficiency, less heat, good self sharpening, not easy to block. The surface roughness of                       machined workpiece is low. Such as glass, ceramic.

         Applications: widely used in cemented carbide fine grinding, semi fine grinding, grinding, polishing, porcelain,

         stone and other non-metallic materials fine grinding.

• Diamond bronze bond series: it is an abrasive tool and tool made by pressing and high temperature sintering with diamond or cubic boron nitride as abrasive and metal powder as bond.

         Features: strong binding force, good wear resistance, long service life, good shape retention, can withstand heavy load

         grinding.

         Application: mainly used for grinding and cutting of glass, gem, stone, semiconductor material, brake pad, and                     electrolytic grinding of cemented carbide. 

• Ceramic bonded diamond grinding wheel series:

         Features: 1. High edge strength, i.e. high grinding efficiency and good self sharpening of grinding wheel;

         2. Good shape retention; 3. Easy correction; 4. High durability and long service life of grinding wheel; 5. High quality

         of knife edge.

        Purpose: it is mainly used for fast, high efficiency and low loss grinding of PCD, PCBN, cemented carbide tools and

        other cutting tools.

• Diamond / resin cutting chip series:

         Diamond cutting chip: mainly used for optical glass, gem, crystal, ceramics, marble, cemented carbide, tungsten

         steel, ferrite, semiconductor, etc.

         Diamond resin cutting chip: mainly used for glass, glass tube / plate, gem, crystal, ceramics, cemented carbide,

         tungsten steel, ferrite, monocrystalline silicon / polycrystalline silicon, silicon rod, semiconductor, etc

Precautions for use:

• Please check carefully before installing the cutting wheel. If there is any gap or other damage, please stop using it.

• When the cutting wheel is marked with the rotation direction, it should be consistent with the rotation direction of the machine tool. On the contrary, the cutting is not sharp, and it is difficult to give full play to the performance of the cutting wheel.

• Please do not use the cutting wheel that does not meet the requirements.

• If any abnormality is found in the cutting process, stop the machine immediately and check the cause.

• When the cutting is not sharp, the grinding wheel should be trimmed. If it is used continuously, the grinding wheel may be damaged due to overheating and overload.

• When the grinding wheel rotates, it is strictly forbidden to cut by hand, let alone touch the sand by hand and body

• The cutting wheel is forbidden to be used in operations other than grooving or cutting, so as to avoid abnormal operation due to uneven stress.

Ordering instructions:

When you order for the first time, please provide the following parameters, so that we can help you choose the most suitable cutting wheel.

Specification and size: abrasive, particle size, binder, outer diameter, thickness, inner diameter, abrasive working layer width, substrate thickness, etc. purpose: workpiece name, cutting size, cutting material;

Service conditions of grooving and cutting: machine tool, grinding wheel speed, feed speed and cutting depth;

Dry and wet cutting requirements: cutting accuracy, chipping requirements, processing surface integrity, etc

Special requirements: whether the tool is assembled and used, whether the resin cutting wheel needs to conduct electricity, whether the outer circle of the cutting wheel has a water tank, the size and quantity of the water tank, whether there is a chip removal groove on the outer side of the cutting wheel base, etc.

Order Operating Procedure: