High Performance Ceramic Bonded Single Crystal Corundum Grinding Wheel
Suitable for grinding high hardness and toughness materials
such as high vanadium high speed steel, austenitic stainless steel
and titanium alloy
Model Type: TYC-GW-019
Single crystal corundum grinding wheel is made of single crystal
corundum as raw material into various shapes of consolidated
grinding tools. It has high hardness, high toughness, good self
sharpening property and is not easy to block.
Process Flow:
First, the single crystal corundum material is pressed and bonded
by a mold with a binder, and then the grinding wheel is fired at
high temperature. In general grinding, compared with other grinding wheels, the
advantages are not particularly obvious. However, if we process
some special workpieces according to the characteristics of the
materials, we can achieve better results.
Scope of application:
Used for cutting and grinding tools, suitable for grinding high
hardness and high toughness materials such as high vanadium high
speed steel, austenitic stainless steel and titanium alloy,
especially for dry grinding and grinding of easily deformed and
easily deformed workpieces.
Main features of CBN grinding wheel:
High grinding efficiency
High wear resistance: the wear resistance of the grinding wheel is
high, and the abrasive consumption is small, especially when
grinding hard and brittle workpiece.
Low grinding force and low grinding temperature
The workpiece has high precision, high finish and good shape
retention
Sketch map of our CBN abrasive wheel
D: out diameter
H: inner diameter
T: thicknesss
X: abrasive area width
Specificaion of Our Graphite Grinding Wheel:
Out Diameter: 350mm
Inner Diameter: 40 mm
Thickness: 127 mm
More Pictures of our CBN Grinding Wheel
Precautions for use:
Please check carefully before installing the cutting wheel. If
there is any gap or other damage, please stop using it.
When the cutting wheel is marked with the rotation direction, it
should be consistent with the rotation direction of the machine
tool. On the contrary, the cutting is not sharp, and it is difficult to
give full play to the performance of the cutting wheel.
Please do not use the cutting wheel that does not meet the
requirements.
If any abnormality is found in the cutting process, stop the
machine immediately and check the cause.
When the cutting is not sharp, the grinding wheel should be
trimmed. If it is used continuously, the grinding wheel may be damaged due
to overheating and overload.
When the grinding wheel rotates, it is strictly forbidden to cut by
hand, let alone touch the sand by hand and body
The cutting wheel is forbidden to be used in operations other than
grooving or cutting, so as to avoid abnormal operation due to
uneven stress.
Ordering instructions:
When you order for the first time, please provide the following
parameters, so that we can help you choose the most suitable
cutting wheel.
Specification and size: abrasive, particle size, binder, outer
diameter, thickness, inner diameter, abrasive working layer width,
substrate thickness, etc. purpose: workpiece name, cutting size,
cutting material;
Service conditions of grooving and cutting: machine tool, grinding
wheel speed, feed speed and cutting depth;
Dry and wet cutting requirements: cutting accuracy, chipping
requirements, processing surface integrity, etc
Special requirements: whether the tool is assembled and used, whether the resin cutting
wheel needs to conduct electricity, whether the outer circle of the
cutting wheel has a water tank, the size and quantity of the water
tank, whether there is a chip removal groove on the outer side of
the cutting wheel base, etc.
Order Operating Procedure:
FAQ:
Q: Do you accept trial order?
A: Yes, small order is available here.
Q: Do you provide samples ? is it free ?
A: Yes, we could offer the sample free of charge, but clients would
bear for the courier freight charges.
Q: How long is your delivery time?
A: Usually 3 days for ready stocklots. and 5-15 days for new
customed order, it is according to quantity.
Q: What is your terms of payment?
A: T/T, Western Union, Paypal, L/C, others.
Q: Can you provide OEM service?
A: Yes, we can produce the goods with clients' logo and brand.
Over 15 years of developing and producing experience in high
precision super hard material tools, we have
established a high efficiency system to provide stable performance
wheel products.
We welcome yr free inquiry for any question in our diamond cutting
wheels. In order to supply exact wheel
type and quotatioon to you, if possible, better for you to
provide us more information like followings:
1. Yr processing objects.
2. Yr OD, ID, Thickness data.
3. Grit size if possible.
4. Rotary speed of your processing machine.
Many Thanks.