Active Member
|
[China]
Address: 176#, The 7th Street, Economic & Technological Development Area. 450016, Zhengzhou, China
Contact name:
Zhengzhou Hongtuo Superabrasive Products Co., Ltd. |
|
|
Mandrel rod Honing Tool with retainer BL3, BL4, BL5, BL6 CH mandrels for open hole
We kindly ask you to prepare us the following information for recommend tools for you:
- Work-piece material, Hardness, special conditions like heat treatment process, etc.
- Work-piece drawing
- Honing machine model, type, … (if there is any picture please prepare for us)
- Honing stones are being used at the moment (Dimensions, grit type, …)
1. Introduce of honing
Honing: An abrasive machining process primarily used for stock removal, precision sizing, and surface finishing of internal and external surfaces. It is characterized by the use of a self-sharpening abrasive stone, a relatively large area of contact with the work, and relatively low cutting speed.
The back end is connected to the connector, and the front groove is the cutting body of honing stone
We are a manufacturer and sales of Diamond and CBN Honing Stones, Grinding Wheels in China. Since 1997, we focus mainly on supplying high precision, high performance superabrasives products to automotive, aerospace, military, hydraulics, bearings, electronics, tools and glass industries.
2.Feature of different material manderls
| CS Mandrels | steel mandrels with soft shoes, for honing most materials |
| CH mandrels | Steel mandrel with hardened shoes, for production honing or hard, rough parts, carbide, ceramics, glass. |
| CB/AB Bronze mandrel | Bronze mandrel for producing very fine finishes and for honing exotic metals. |
| Diamond plated super mandrels | designed to provide a long wearing guide shoe to increase mandrel life. |
3.Series of mandrel:
| K series |
|
| L series |
|
| BL series |
|
4. Application and working principle of honing rod
Usage: honing rod is used in the hole with high honing accuracy and finish.
Working principle: the workpiece is fixed, the honing rod rotates in a straight line and grinds the hole wall.
5.Our detailed mandrel pictures:
6.Plastic box used for packing mandrel
7.Our warehouse pictures
8. Our factory
If you would like samples of our products for trials and inspection, please call or email us. I know you will be pleased with our response.
HONING CONDITION SOLUTIONS
Poor stone life
1, Decrease cutting pressure
2, use faster spindle speed
3, use harder stone (one with higher hardness number)
4, use coarser grit stone ( one with lower grit number)
5, increase lubricity of honing fluid.
9.Our inspection equipment
