15.925 Diameter Bore Engine Cylinder Hone , Open Hole Portable Cylinder Hone

15.925 diameter bore Integral Sintering Sleeve Engine Cylinder Hone , Open Hole Portable Cylinder Hone

The single stroke honing tool is also known as a single pass honing tool that incorporates a super abrasive sleeve mounted on a tapered mandrel for precision bore sizing and finishing. Each individual piece of this diamond tool is designed to be matched with corresponding honing machines. According to differences in the bore diameter, customers can choose from our existing models of honing tools, or customize a new honing tool.

The single stroke honing tool works for finishing bores at a minimum of Φ2mm, and is all equipped with thrust pads. In addition, depending on honing and finishing processes, this bore finishing tool come in four types: vertical honing tool, horizontal honing tool, vertical cylinder honing tool, and horizontal cylinder honing tool. Specific product descriptions are as follows.

processing parameter:

Input for dia 15.875mm

Part length 30 mm

Through bore

Vertical honing machine engiss USA no of spindle 3

Honing stock is 0.05 mm less from final size

Surface finish requirement after honing 0.8 Ra max

Forged steel hardness about 35 to 40 HRC

use single pass honing tools mandrel :JHG-3/15.925-75/75

sinterd sleeve: P1-15.925W D213

                        P2-15.925W D126

                        P3-15.925W D64