Active Member
|
[China]
Address: 101-201，Building 4，No.1 Branch of Zhongcheng Life Science Park, No. 14 Zhongxing Road, Xiuxin Community, Kengzi Street Office, Pingshan District, Shenzhen, China
Contact name:wenly
Shenzhen Yurucheng Dental Materials Co., Ltd |
|
|
Dental Milling Machine Cad Cam Dental Zirconia Block SK-5A 5axis Milling Machine
Detailed Product Description of dentai milling machine SK-5A:
| Name | Yucera SK-5A dental milling machine |
| weight | Cutting machine:95KG Main engine:20KG |
| Rotating axis operating angle | A:360° B:±30° |
| Cutting precision | 0.02mm |
| Tool magazine capacity | 5 |
| Main axis speed | 0-60,000rmp |
Advantages
1.Split type machine; easy to maintain, reduce the damage of dust to the main engine,;and prolong the service life of the machine
2.Horizontal machine, lower center of gravity, strong stability; processing speed increased by 20%
3.Improved fixture , the utilization rate of zirconium block is increased by 30%; 38-40 units of crown/bridge can be cut at one time
Cleaning and maintenance after processing for 5 axis cadcam milling
machine
Check the dust system regularly, preferably for two to three days,
insert the trachea pipe into the hole behind the vacuum cleaner,
press the dust key and suck.
Equipment maintenance
1.Regular cleaning:Use a suitable liquid detergent to clean the plastic part,and be careful not to use an air gun to clean the Interior to prevent dust and debris from entering the mechanical parts.
2.Material fixture cleaning:Clamps and screws should be kept clean when placing material for optimum grip
3.Main Axis Clip Cleaning:Do not spray oily spray or compressed air containing oil and water directly on the spindle head; The spindle chuck and bur must be clean.The entry of impurities can cause processing failures
