Automation Pneumatic Steel Coil Uncoiler Mandrel Expansion Unwinding Decoiler Straightener Feeder Machine

The NC servo feeder is replaced by a multi-station stamping production mode consisting of a multi-station punching machine. The multi-station stamping production line can install multiple sets of molds on one punching machine, which can realize the single stamping process and complete the multi-step stamping processing production. The positioning is accurate, the product quality is good, and the fully automated stamping production with high efficiency, high precision, high quality, energy saving and material saving is realized.

When the multi-station stamping production line is used, the coil material is unrolled and discharged through the material rack, and the leveling machine is leveled and then sent to the punching mold through the NC servo feeder. The material rack is controlled by the induction frame between the leveling machine and the feeder. The automatic feeding of the coil material, the size of each feeding is automatically controlled by the NC servo feeder.

The robot sucks the workpiece through the suction cup, the punch slider rises, and the robot starts working. When the robot arm moves the workpiece into the third mold and gives a signal, the punch slider descends and completes the third step of the edge forming.

When the last arm of the robot draws the workpiece from the station to the conveyor belt position, the entire complete stamping cycle of the workpiece ends, and the fully automated stamping production is realized simply and quickly. Only one type of mold can be punched at a time, and the feeder is equipped with a multi-station punch to realize multi-step stamping.

Specification:
 

Straigtening performance:
 

*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi