GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD. |
|
Air feeder E type solenoid valve features
1. The air feeder E-type solenoid valve can be used instead of the
floating rod. It is to control the feeder stroke before the machine
is used. If the feeding time is slow (slow) or early (fast), the
convexity angle can be adjusted.
2. Air feeder E type solenoid valve installation:
The E-type solenoid valve has two wires, one is connected to the
power source B, one is connected to the micro-switch code NORMALLY,
and the power source A is connected to the micro-switch code
COMMON.
3. Air feeder E-type solenoid valve operation method:
A, do not feed;
B. The measurement is sent to the required length;
C. Rotate the speed adjustment screw clockwise to slow down the
speed;
D. Slowly adjust the punching machine to the convex input and touch
micro switch by hand.
When the convex transmission first hits the micro switch, when the
slider moves backwards, only the gasket is touched and the spacer
ring is not touched. When it is correct, the convex contact touches
the micro switch, and the slider moves between the spacer ring and
the pad garden, and the distance between the two sides is equal.
Specification:
Model | MAC2-400 | MAC2-500 | MAC2-600 | MAC2-800 | ||
Stock Width(mm) | 50-400 | 50-500 | 50-600 | 50-800 | ||
Stock Thickness(mm) | 0.3~3.2 | 0.3-3.2 | 0.3-3.2 | -3.2 | ||
Max.Coil Weight(kg) | 3000 | 3000 | 3000 | 5000 | 5000 | 7000 |
Max.Coil O.D.(mm) | 1200 | 1200 | 1200 | |||
Coil I.D.(mm) | 8 | 8 | 508 | 508 | ||
Feed Length(mm) | ~500* | ~500* | ~500* | ~500* | ||
Max. Line Speed(m/min) | 16-24 | 16-24 | 16-24 | 16-24 | ||
Work Roll Number(pieces) | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | ||
Feed Roll Number(set) | 1 | 1 | 1 | 1 | ||
Main Motor(kw) | AC2.9 | AC2.9 | AC4.4 | AC4.4 | ||
Mandrel Expansion | hydraulic | hydraulic | hydraulic | hydraulic | ||
Reel Motor(kw) | 1.5 | 1.5 | 1.5 | 2.2 | 2.2 | 3.7 |
Power(V) | 3 Phase 220V/380V/50HZ | |||||
Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 |
Straigtening performance:
tock Thicknees (mm) | Stock Width (mm) | |||
0.3 | 400 | 500 | 600 | 800 |
0.4 | ||||
0.6 | ||||
0.8 | ||||
1.0 | ||||
1.2 | ||||
1.4 | ||||
1.6 | 470 | 470 | ||
1.8 | 400 | 400 | ||
2.0 | 360 | 360 | ||
2.3 | 300 | 300 | 300 | 300 |
2.5 | 230 | 230 | 230 | 230 |
2.8 | 150 | 150 | 150 | 150 |
3.2 | 110 | 110 | 110 | 110 |
*1:(Pneumatic):Option in case of pneumatic mandrel expansion is
provi