Active Member
|
[China]
Address: No. 12, Chuangxing Road, Baisha, Humen Town, Dongguan, Guangdong, China
Contact name:Calin Deng
GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD. |
|
|
The clip feeder consists of six parts: the fuselage, the input
mechanism, the transmission adjustment mechanism, the feeding
mechanism and the timing mechanism.
The components of the clip feeder body are fixed on the horizontal
plate of the base, and the vertical plate of the base is provided
with a plurality of long holes, and the height of the mounting
plate on the feeding side of the punching machine is adjusted by
the bolt, and the front end portion of the top of the fuselage A
front support plate and a rear end face are connected with a rear
support plate, and a plurality of open guide grooves are arranged
on the rear support plate surface to adjust and fix the same number
of positioning strips of the same smooth and uniform extension
support plate.
The input shaft of the input mechanism extends out of the fuselage
to connect the force gauge pulley, and the timing pulley connects
the punch crank through the timing belt to provide rotary power for
the clip feeder main shaft.
The unique advantage of the clip feeder: the components of different molds are used to make the
composition of the fine-tuning timing belt adjust the movement at
any time, avoiding the timing belt skipping affecting the feeding
and reducing the uneven punching impact of the punching mold.
Eliminate the gap of adjusting screw screw screw to achieve simple
and accurate adjustment of drive feed timing, improve product
quality and reduce the occurrence of defective rate, protect and
improve the service life of the mold.
Specification:
| Model | MAC2-400 | MAC2-500 | MAC2-600 | MAC2-800 | ||
| Stock Width(mm) | 50-400 | 50-500 | 50-600 | 50-800 | ||
| Stock Thickness(mm) | 0.3~3.2 | 0.3-3.2 | 0.3-3.2 | -3.2 | ||
| Max.Coil Weight(kg) | 3000 | 3000 | 3000 | 5000 | 5000 | 7000 |
| Max.Coil O.D.(mm) | 1200 | 1200 | 1200 | |||
| Coil I.D.(mm) | 8 | 8 | 508 | 508 | ||
| Feed Length(mm) | ~500* | ~500* | ~500* | ~500* | ||
| Max. Line Speed(m/min) | 16-24 | 16-24 | 16-24 | 16-24 | ||
| Work Roll Number(pieces) | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | ||
| Feed Roll Number(set) | 1 | 1 | 1 | 1 | ||
| Main Motor(kw) | AC2.9 | AC2.9 | AC4.4 | AC4.4 | ||
| Mandrel Expansion | hydraulic | hydraulic | hydraulic | hydraulic | ||
| Reel Motor(kw) | 1.5 | 1.5 | 1.5 | 2.2 | 2.2 | 3.7 |
| Power(V) | 3 Phase 220V/380V/50HZ | |||||
| Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 | ||
Straigtening performance:
| tock Thicknees (mm) | Stock Width (mm) | |||
| 0.3 | 400 | 500 | 600 | 800 |
| 0.4 | ||||
| 0.6 | ||||
| 0.8 | ||||
| 1.0 | ||||
| 1.2 | ||||
| 1.4 | ||||
| 1.6 | 470 | 470 | ||
| 1.8 | 400 | 400 | ||
| 2.0 | 360 | 360 | ||
| 2.3 | 300 | 300 | 300 | 300 |
| 2.5 | 230 | 230 | 230 | 230 |
| 2.8 | 150 | 150 | 150 | 150 |
| 3.2 | 110 | 110 | 110 | 110 |
*1:(Pneumatic):Option in case of pneumatic mandrel expansion is
provi
