AC 4.4 Kw Sheet Metal Decoiler Uncoiler , Nut Automatic Feeder

The heavy-duty material rack can be used for the first unwinding process in stamping production, or for the final finishing of finished products or scraps after stamping.

However, in order to ensure the tidy and compact winding of the heavy-duty material frame during the winding process of the finished product, a material tensioning machine is required at the front end of the Ruihui heavy-duty material frame.

The stamped material is first passed through a tensioner, tensioned by a tensioner, and then retracted by a heavy material frame.

However, at present, Ruihui's standard tensioning and receiving material racks are used to wind up the finished copper strips, aluminum strips, and finished strips from the tensioner into the heavy-duty material rack.

The small detachment angle causes the speed of the retracting of the heavy material frame and the pinching speed of the tensioner to be consistently consistent during the high speed winding process.

Therefore, it is inevitable that the finished material strip will be shaken when it is discharged from the tensioner, so that when the heavy material rack is received, the surface of the outermost copper strip of the material is often scratched.

The wear and tear caused damage to the finished copper strip and aluminum strip, and the quality of the finished product could not be guaranteed.

In order to fundamentally solve the problem that the copper strip and the aluminum strip are easily scratched when harvesting, Ruihui Machinery specially designed and produced a custom-made tensioning material rack for the winding of such finished strips.

The utility model is provided with a winding guide roller on the top of the heavy material frame, which can fundamentally solve the problem of surface scratching when the copper strip and the aluminum strip are received.

The phenomenon of wear and failure of the finished product is avoided, and the surface quality and production efficiency of the product are improved.

The winding guide roller of Ruihui custom tensioning material rack is placed on the top of the heavy material rack, and the finished copper strip and aluminum strip are discharged from the tensioner and passed through the guide drum.

Then the material frame is finished to rewind, so that the finished copper strip and the aluminum strip will have a larger detachment angle from the guide roller guide roller to the material frame expansion and contraction reel, thereby fundamentally eliminating the original because the detachment angle is too small. The resulting abrasions ensure the quality of the tape winding.

Specification:
 

Straigtening performance:
 

*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi