Home Companies Gezhi Photonics (Shenzhen) Technology Co., Ltd.

1x32 Multi Channel Single mode and Multimode Optical Switch fiber optical switch

Gezhi Photonics (Shenzhen) Technology Co., Ltd.

Contact Us

[China] country

Trade Verify

Address: 504,A Bld.,YiQuan Industry Park,FuQian Road No.434, FuCheng Street, Shenzhen, China 518110

Contact name:Ena Lin

Inquir Now

Gezhi Photonics (Shenzhen) Technology Co., Ltd.

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

1x32 Multi Channel Single mode and Multimode Optical Switch fiber optical switch

Country/Region china
City & Province shenzhen guangdong
Categories Antenna
InquireNow

Product Details

Product description

 

                                       1x32 Multi Channel Single mode and Multimode Optical Switch fiber optical switch

 

Any 1xN configuration, Any fiber type, Wide band working wavelength, 1x32 Multi Channel optical switch is a kind of light path control equipment,can realize multi-channel fiber optic light path switching,In optical fiber transmission system, it is used for multi-channel fiber monitoring, multi light source/ detector selection, and optical fiber path protection etc. Besides, it is also used in optical fiber test system for optical fiber and its component test, outdoor cable test and multi-port optical sensors monitoring system.

 

Feature

 

 1.a kind of functional component, with the ability of switching optical route.

 2. 1 input and N output fiber ports that selectively transmits, redirects,

 3.or blocks optical power in a fiber optic transmission line.

 4. bi-directional and can be used in either the 1xN or Nx1 direction.

 5. designed for use in optical fiber communication networks and measurement instruments.

 

Specification

Parameter Unit 1x4 1x8 1x12 1x16 1x24 1x32 1x64 1x128
Wavelength Range nm 1260~1650
Testing Wavelength nm 1310/1550
Insertion Loss (Typical) dB 0.5 0.5 0.5 0.5 0.5 0.5 0.5 1.0
Insertion Loss (Max) dB ≤0.8 ≤0.8 ≤1.0 ≤1.0 ≤1.0 ≤1.0 ≤1.0 ≤1.2
Return Loss dB SM ≥ 50
Crosstalk dB ≤-70
PDL dB ≤0.05
WDL dB ≤0.20
TDL dB ≤0.20
Repeatability dB ≤0.02
Lifetime times >107
Switching Time ms ≤10 (Adjacent Channel)
Optical Power mW ≤500
Control Mode / TTL or Customized
Operating Temperature -10~+55
Storage Temperature -40~+85
Module type Dimensions mm 135x64x32 135x60x37 184x78x66 184x156x66

Ordering Information OSW-XxX-X-XX-X-XX-XX-XX-XX

OSW Mode Wavelength Package Fiber Type Fiber Diameter Fiber Length Connector

1x4

1x8

1x16

1x32

1x64

1x128

S=Specity

S=SM

M=MM

85=850nm

13=1310nm

15=1550nm

85/13=850/1300

13/15=1310/1550nm

S=Specify

B=Metal Box

S=Specify

M5=50/125

M6=62.5/125

S9=9/125

S=Specify

25=250um

09=900um

S=Specify

05=0.5m

10=1.0m

S=Specify

00=None

FP=FC/UPC

FA=FC/APC

SP=SC/UPC

SA=SC/APC

LP=LC/UPC

LA=LC/APC

S=Specify

 

 

PIN Configurations

DB-9 male connector (1xN≤16) Optical Switch

DB-9 male connector
Pin No. I / O Signal Description
1 Input D0

 

 

 

D0~ D3 is channel selection Bit0~Bit3,D0 is low, D3 is high

2 Input D1
3 Input D2
4 Input D3
5 Input RESET TTL, Low level reset to channel 0. High level means channel selection bits are effective.
6 Out READY TTL, Ready (High=Not ready, Low=Ready)
7 Out ERROR TTL, Error OR Failure , (High=Error, Low=No error)
8 Power GND Ground
9 Power VCC

5.0±5% VDC Power Supply (max 500mA)

 

 

DB-15 male connector (1xN≤128) Optical Switch

DB-15 male connector
Pin No. I / O Signal Description
2 Input D0

 

 

 

D0~ D5is channel selection Bit0~Bit4,D0 is low, D4 is high

3 Input D1
4 Input D2
5 Input D3
6 Input D4
10 Input D5
11 Input RESET TTL, Low level reset to channel 0. High level means channel selection bits are effective.
7 Out READY TTL, Ready (High=Not ready, Low=Ready)
8 Out ERROR TTL, Error OR Failure , (High=Error, Low=No error)
1,9 Power GND Ground
12 Power VCC1 5.0V±5% VDC motor power (max 950mA)
15 Power VCC2 5.0V±5% VDC Drive circuit power(50mA)
13,14   NC NC

 

Shipping 

 

 

Q1:Can I have a sample order? What is your MOQ?

A1:Sample order is welcome to test and check quality. We don't MOQ, 1pcs sample is available. Also Mixed samples are acceptable.
Q2: What's the Lead time?
A2: The normal lead time is about 1week, For big quantity and special products. Please check lead time with our sales representative. But we keep stock for some products, could ship 1-3 days after receiving payment.
Q3: What are the payment terms?
A3: Payment term: T/T, Paypal, Western union,cash payment, Alibaba etc.
Q4: What is your warranty time
A4: 3 years' warranty.
Q5: Could I use our own logo, label and package?
A5: Yes, we could provide OEM service which according to your requirements, design products label, logo, PN, SN, package.

Hot Products

Product description 8CH DWDM Module Pluggable LGX Box Package DWDM Mux Demux Dual Fiber With LC UPC ...
Product description Singlemode or Multimode1x3 Raman Filter WDM for DTS Systems(1450/1550/1650nm) ...
Production description Fiber Optic Line Protection Olp Module Optical Line Protection System(OLP) ...
Product description 1x32 Multi Channel Single mode and Multimode Optical Switch fiber optical switch ...
Product description MxN Matrix Optical Switch Rackmount for Ring network Testing of fiber optical ...
Product description FSW 1x48 Fiber Optical Switch 19inch 2U Rackmount 1260~1650nm Single Mode 1x48 ...