Shanghai Zhoubo welding & cutting technology CO.,LTD. |
Verified Suppliers
|
|
HT4400 Swril Ring, Plasma Cutter Swril Ring 120791, Plasma Cutting Swirl Ring
1. consumables for HT4400, HPR400XD, HPR260XD, HPR130XD, HPR260,
HPR130, HSD130, HD3070, HD4070, HT2000, MAX200, POWERMAX1650,
POWERMAX1250, POWERMAX65, POWERMAX85, POWERMAX45, POWERMAX30 and so
on.
2. Kjellberg consumables for HiFocus80i, HiFocus100i, HiFocus130i,
HiFocus160i, HiFocus280i, HiFocus360i, HiFocus440i and so on.
3. Esab consumables for PT-25, PT-36, PT-37, PT-600, PT-15XL,
PT-19XL, PT-31XL and so on.
4. Koike consumables for SUPER 400, SUPER 400 PLU.
5. Komatsu plasma consumables for 30KW, 60KW 3082, 3084, 3086,
6082, 6084.
Machine | HEC NO. | Ref NO. | Description |
| H04785 | 120785 | Electrode,Oxygen,100Amp |
H04793 | 120793 | Electrode,Oxygen,200Amp | |
H04802 | 120802 | Electrode,Oxygen,300Amp | |
H04810 | 120810 | Electrode,Oxygen,400Amp | |
H04855 | 120855 | Electrode,Nitrogen,200/400Amp | |
H74783 | 120783 | Swirl Ring,Oxygen,100Amp | |
H74784 | 120784 | Swirl Ring,Oxygen,100Amp,CCW | |
H74791 | 120791 | Swirl Ring,Oxygen,200Amp | |
H74792 | 120792 | Swirl Ring,Oxygen,200Amp,CCW | |
H74913 | 120913 | Swirl Ring,Oxygen,300Amp | |
H74914 | 120914 | Swirl Ring,Oxygen,300Amp,CCW | |
H74939 | 120939 | Swirl Ring,Oxygen,400Amp | |
H74940 | 120940 | Swirl Ring,Oxygen,400Amp,CCW | |
H74853 | 120853 | Swirl Ring,Nitrogen,200/400Amp | |
H14777 | 120777 | Nozzle,Oxygen,100Amp | |
H14778 | 120778 | Nozzle,Oxygen,100Amp,CCW | |
H14787 | 120787 | Nozzle,Oxygen,200Amp | |
H14788 | 120788 | Nozzle,Oxygen,200Amp,CCW | |
H14794 | 120794 | Nozzle,Oxygen 300/Nitrogen 200Amp | |
H14795 | 120795 | Nozzle,Oxygen 300/Nitrogen 200Amp,CCW | |
H14934 | 120934 | Nozzle,Oxygen,400Amp | |
H14935 | 120935 | Nozzle,Oxygen,400Amp,CCW | |
H14856 | 120856 | Nozzle,Nitrogen,400Amp | |
H14857 | 120857 | Nozzle,Nitrogen,400Amp,CCW | |
H44786 | 120786 | Retaining Cap,100/200/300/400Amp | |
H44907 | 120907 | Retaining Cap,100/200/300/400Amp With HIS Tab | |
H44786 | 120786 | Retaining Cap,100/200/300/400Amp | |
H44984 | 120984 | Retaining Cap,100/200/300/400Amp Under Water | |
H84651 | 120651 | Torch Main Body | |
H94025 | 120025 | Water cooling tube | |
H94028 | 044028 | O-ring | |
| H04285 | 020285 | Electrode,N2 |
H04663 | 020663 | Electrode,Oxygen,260Amp | |
H04630 | 120630 | Electrode,Oxygen,340Amp | |
H74039 | 020039 | Swirl Ring,N2,120/166/187 | |
H74040 | 020040 | Swirl Ring,N2 | |
H74623 | 020623 | Swirl Ring,Oxygen | |
H74135 | 120135 | Swirl Ring,Oxygen,340Amp | |
H14281 | 020281 | Nozzle,N2 | |
H14282 | 020282 | Nozzle,N2 | |
H14283 | 020283 | Nozzle,N2 | |
H14284 | 020284 | Nozzle,N2 | |
H14086 | 020086 | Nozzle,Oxygen | |
H44580 | 020580 | Retaining Cap,N2 | |
H44579 | 020579 | Retaining Cap | |
H44185 | 120185 | Retaining Cap,Oxygen,50Amp |
Technical Support:
Anti interference of plasma power supply
The main interference source of the plasma numerical control system
is the power supply part. It usually adopts the high frequency
ignition device is used to ignite the arc, high frequency
transformer secondary side voltage up to 3000 - 6000V, pulse
frequency of 100 Hz, radiated interference and the grid pollution
(interference) are very strong, and high current AC / DC contactors
and relays off fault on the grid will cause surge. Usually the
plasma cutting machine arc caused by the computer's internal chaos,
can not be normal cutting, the first CNC cutting machine and even
require the user to start arc and then start the computer, running
the CNC system program. This not only makes the complicated
operation, the computer is not fully utilized, but also seriously
affect the life of the computer, so the suppression of plasma power
interference, reduce the pollution to the power network is the
primary problem, specific measures: