Shanghai Zhoubo welding & cutting technology CO.,LTD. |
Verified Suppliers
|
|
220181 Silver Electrode, Plasma Cutting Consumables For HPR130XD Machine
Method for prolonging the service life of the plasma wearing
parts
1 ensure the correct air pressure and flow rate of the plasma gas
The correct pressure and flow rate of the plasma gas are very
important to the service life of the wearing parts. If the pressure
is too high, the life of the electrode will be greatly reduced; If
the pressure is too low, the nozzle's life will be affected, using
a reasonable cut distance: In accordance with the requirements of
the use of the specification, the use of a reasonable cut (cutting
the distance between the nozzle and the working surface), when the
perforation, the initial arcing distance as far as possible The
maximum height of the plasma arc can be transferred by 2 times of
normal cutting distance. the thickness of the perforation should be
within the scope of the plasma system. Cutting machine can not be
perforated over the thickness of the plate, usually the thickness
of the normal thickness of the thickness of the cutting 1/2. For
example: the 100A plasma system for cutting 1 inches (about 25mm)
of carbon steel, the system perforation thickness should be 0.5
inches (about 12.5mm). nozzles do not overload, Let the nozzle
overload (that is, over the working current of the nozzle), the
nozzle will soon be damaged. The current intensity should be 95% of
the working current of the nozzle. For example: 100 the current
intensity of the nozzle should be set to 80--60A. keep the drying
and cleaning of the plasma gas. Plasma system need to dry clean
plasma gas to work properly, gas compression system often pollute
the gas, so easy to shorten the service life of wearing parts,
resulting in damage to the non normal damage. The quality of test
gas method is the system in state test, a mirror is placed at the
bottom of the torch, torch vent gas, such as on the mirror produces
water vapor or mist matter, you need to from gas compression system
begin to check and correct them in time.
Machine | HEC NO. | Ref NO. | Description |
| H03192 | 220192 | Electrode,30Amp |
H03552 | 220552 | Electrode,50Amp | |
H03187 | 220187 | Electrode,80Amp | |
H03181 | 220181 | Electrode,130Amp | |
H03352 | 220352 | Electrode,200Amp | |
H03435 | 220435 | Electrode,260Amp | |
H03649 | 220649 | Electrode,130Amp Bevel | |
H03541 | 220541 | Electrode,260Amp Bevel | |
H03665 | 220665 | Electrode,130Amp(silver Plus) | |
H03666 | 220666 | Electrode,200Amp(silver Plus) | |
H03668 | 220668 | Electrode,260Amp(silver Plus) | |
H03629 | 220629 | Electrode,400Amp | |
H73180 | 220180 | Swirl Ring,30Amp | |
H73553 | 220553 | Swirl Ring,50Amp | |
H73353 | 220353 | Swirl Ring,200Amp | |
H73179 | 220179 | Swirl Ring,80/130/260Amp(Bevel) | |
H73436 | 220436 | Swirl Ring,260/260Amp(Bevel) | |
H73631 | 220631 | Swirl Ring,400/400Amp(Bevel) | |
H13193 | 220193 | Nozzle,30Amp | |
H13554 | 220554 | Nozzle,50Amp | |
H13188 | 220188 | Nozzle,80Amp | |
H13182 | 220182 | Nozzle,130Amp | |
H13354 | 220354 | Nozzle,200Amp | |
H13439 | 220439 | Nozzle,260Amp | |
H13646 | 220646 | Nozzle,130Amp(Bevel) | |
H13542 | 220542 | Nozzle,260Amp(Bevel) | |
H13632 | 220632 | Nozzle,400/400Amp(Bevel) | |
H33754 | 220754 | Retaining Cap 30/50Amp | |
H33176 | 220176 | Retaining Cap 80/130Amp | |
H33355 | 220355 | Retaining Cap 200Amp | |
H33433 | 220433 | Retaining Cap 260Amp | |
H33603 | 220603 | Retaining Cap (Bevel) 130/260Amp | |
H33756 | 220756 | Retaining Cap 80/130Amp | |
H33757 | 220757 | Retaining Cap 200Amp | |
H33760 | 220760 | Retaining Cap 260Amp | |
H33635 | 220635 | Retaining Cap 400/400Amp(Bevel) | |
H33740 | 220740 | Retaining Cap (Bevel) 130/260Amp | |
H23194 | 220194 | Shield,30Amp | |
H23555 | 220555 | Shield,50Amp | |
H23189 | 220189 | Shield,80Amp | |
H23183 | 220183 | Shield,130Amp | |
H23356 | 220356 | Shield,200Amp | |
H23440 | 220440 | Shield,260Amp | |
H23645 | 220645 | Shield,130Amp(Bevel) | |
H23545 | 220545 | Shield,260Amp(Bevel) | |
H23761 | 220761 | Shield,200Amp | |
H23764 | 220764 | Shield,260Amp | |
H23636 | 220636 | Shield,400/400Amp(Bevel) | |
H23742 | 220742 | Shield,130Amp(Bevel) | |
H23741 | 220741 | Shield,260Amp(Bevel) | |
H43173 | 220173 | Retaining Cap 30/50/80/130Amp | |
H43398 | 220398 | Retaining Cap 200/260/(Bevel)130/260Amp | |
H43747 | 220747 | Retaining Cap 30/50/80/130Amp | |
H43637 | 220637 | Retaining Cap 200/260/400Amp(Bevel) | |
H83818 | 128818 | HPR torch assembly | |
H83162 | 220162 | Quick-disconnect torch | |
H83163 | 220163 | Quick-disconnect recepticle | |
H83706 | 220706 | Quick-disconnect torch | |
H83705 | 220705 | Quick-disconnect recepticle | |
H93571 | 220571 | Water Tube with O-Ring | |
H93340 | 220340 | Water Tube with O-Ring(30/50/80/130/200/260Amp) | |
H93700 | 220700 | Bevel water tube(mild steel-130A) |