|
[China]
Trade Verify
Address: No. 188, Section 3 of Shuanghua Road, Chengdu, China
Contact name:Doris
Sichuan Xintiecheng Machinery Co., Ltd |
|
Verified Suppliers
|
|
|
Z2 C45 Steel Shaft Locking Device Clamping Elements
Overiew
Shaft locking device/clamping elements belong to the category of general mechanical parts and are used to connect two shafts (driving shaft and driven shaft) in different mechanisms to make them rotate together to transmit torque.
Basic Dimensions and Parameters of Z2 C45 Steel Shaft Locking Device Clamping Elements
| Size (mm) | Dimensions (mm) | Rated Load | Contact Pressure | Locking Screws (G.12.9) | Approx Weight (KG) | |||
| d x D x L | L1 | L2 | Axial (KN) | Torque (N.m) | Shaft (Mpa) | Hub (Mpa) | Tightening (N.m) | |
19 x 47 x 20 20 x 47 x 20 22 x 47 x 20 | 17 17 17 | 26 26 26 | 28 28 30 | 270 290 290 | 221 232 200 | 93 98 90 | 15 15 15 | 0.20 0.22 0.23 |
24 x 50 x 20 25 x 50 x 20 28 x 55 x 20 | 17 17 17 | 26 26 26 | 32 33 36 | 380 400 520 | 216 200 208 | 103 100 104 | 15 15 15 | 0.23 0.23 027 |
30 x 55 x 20 32 x 60 x 20 35 x 60 x 20 | 17 17 17 | 26 26 26 | 37 43 44 | 520 690 770 | 183 209 196 | 99 113 | 15 15 15 | 0.26 0.28 0.30 |
38 x 65 x 20 40 x 65 x 20 42 x 75 x 24 | 17 17 20 | 26 26 32 | 49 49 74 | 940 980 1560 | 202 190 233 | 116 115 129 | 15 15 37 | 0.33 0.32 0.57 |
45 x 75 x 24 48 x 80 x 24 50 x 80 x 24 | 20 20 20 | 32 32 32 | 74 74 75 | 1700 1830 1830 | 216 214 196 | 127 122 118 | 37 37 37 | 0.55 0.60 0.56 |
55 x 85 x 24 60 x 90 x 24 65 x 95 x 24 | 20 20 20 | 32 32 32 | 89 92 99 | 2490 2640 3240 | 218 192 202 | 140 126 136 | 37 37 37 | 0.65 0.66 0.72 |
70 x 110 x 28 75 x 115 x 28 80 x 120 x 28 | 24 24 24 | 38 38 38 | 124 135 137 | 4700 4800 5400 | 218 185 185 | 135 119 124 | 70 70 70 | 1.27 1.33 1.35 |
85 x 125 x 28 90 x 130 x 28 95 x 135 x 28 | 24 24 24 | 38 38 38 | 146 148 165 | 6300 6500 7800 | 195 178 193 | 130 124 134 | 70 70 70 | 1.45 1.55 1.65 |
100 x 145 x 33 105 x 150 x 33 110 x 155 x 33 | 26 26 26 | 45 45 45 | 187 188 195 | 9560 9750 10330 | 195 178 175 | 135 125 121 | 127 127 127 | 2.20 2.40 2.40 |
120 x 165 x 33 125 x 170 x33 130 x 180 x 38 | 26 26 34 | 45 45 50 | 210 210 279 | 12600 13370 18030 | 176 175 167 | 128 121 116 | 127 127 127 | 2.60 3.20 3.60 |
140 x 190 x 38 150 x 200 x 38 160 x 210 x 38 | 34 34 34 | 50 50 50 | 296 326 351 | 20800 24300 28100 | 162 168 168 | 123 124 129 | 127 127 127 | 3.80 4.10 4.50 |
170 x 225 x 44 180 x 235 x 44 190 x 250 x 52 | 38 38 46 | 58 58 66 | 392 435 502 | 33300 39100 44700 | 163 172 155 | 119 131 120 | 195 195 195 | 5.90 6.10 8.50 |
200 x 260 x 52 210 x 275 x 56 220 x 285 x 56 | 46 50 50 | 66 72 72 | 522 605 640 | 51900 63500 69900 | 150 157 158 | 116 121 122 | 195 300 300 | 9.00 10.1 11.0 |
240 x 305 x 56 250 x 315 x 56 260 x 325 x 56 | 50 50 50 | 72 72 72 | 703 737 840 | 84300 92200 109200 | 162 158 172 | 127 125 140 | 300 300 300 | 12.4 12.8 19.3 |
280 x 355 x 66 300 x 375 x 66 320 x 405 x 78 | 60 60 72 | 84 84 98 | 870 974 1312 | 122100 145900 212600 | 143 147 157 | 114 119 126 | 410 410 590 | 21.1 21.5 29.8 |
340 x 425 x 78 360 x 455 x 90 380 x 475 x 90 | 72 84 | 98 112 112 | 1338 1560 1633 | 222800 296700 300600 | 149 153 134 | 119 122 115 | 590 790 790 | 30.0 43.5 46.5 |
400 x 495 x 90 420 x 515 x 90 440 x 545 x 102 | 84 84 96 | 112 112 126 | 1668 1830 1980 | 325100 385200 441400 | 136 136 126 | 111 113 102 | 790 790 1000 | 47.0 50.0 65.0 |
Drawings of Z2 Clamping Elements
Materials
This product is made of C45 steel, a medium carbon high quality steel with high strength, which is generally used in normalised condition due to poor hardenability, and tempered when higher mechanical properties are required. Cold deformation plasticity is medium, annealed and normalized machinability than the tempered good. Used for the manufacture of parts with high strength requirements.
| Tensile strength σb (MPa) | ≥600(61) |
| Yield strength σs (MPa) | ≥355(36) |
| Elongation δ5 (%) | ≥16 |
| Section shrinkage ψ (%) | ≥40 |
| Impact power Akv (J) | ≥39 |
| Impact toughness value αkv (J/cm2) | ≥49(5) |
Our Factory
Main Manufacturing Equipment
Packing
Typical Application
For connecting drives in various machines.
FAQs
Q1: Are you manufacturer or trading company?
A1: We are manufacturer with more than 10,000 square meters plant.
Q2: Will you provide free samples?
A2: Yes, we will provide free sample for customer to test.
Q3: Can you make CNC machining parts according to our drawings?
A3: Yes, we can make the parts according to your drawings.
Q4: Can you make CNC machining parts according to samples?
A4: Yes, we can make the parts according to your samples.
Q5: Which shipping method will you use for delivery?
A5: It depends on customer. Our price is based on FOB, customer needs to afford the shipping. But we are happy to help based on request.
Q6: What’s your payment terms?
A6: We accept T/T, Western Union, Money Transfer, TAAJ, etc.
