|
[China]
Trade Verify
Address: Room No.5, 15th Floor, Yuyang Plazma, Bayiqizhong Rd, fuzhou, China
Contact name:Patricia
EOOE Hydraulic Co.,Ltd |
|
Verified Suppliers
|
|
|
10-100T Three-Line Hydraulic Cold Drawing Machine
Ⅰ. Brief Introduction
Three-line hydraulic cold drawing machine consists of a main base, a drawing trolley, a hydraulic system, and a corresponding electrical control system. Install a drawing die on the mold base, and install a hydraulic cylinder on the cylinder base. The hydraulic cylinder drives the drawing trolley to run on the bed guide rail. There is a three-slot tube installation device tilted above the main engine seat, and a core rod bracket corresponding to the three-slot tube installation device is installed in front of the main engine seat. Three pulling clamps are installed in front of the pulling trolley.
Ⅱ. Customer Case
| Main Parameters of YLB-B-100-8/10x3 | |
| Raw Material | Carbon Steel |
| Raw Material OD | Φ12.7~Φ76.3 |
Raw Material WT | 0.8~6 |
Raw Material Locating Pad Type | Off-line head making |
Min. Drawing Speed | 2.5 m/min |
| Main Cylinder | 280/140-8500 |
| Clamp Device Type | Two-petal tooth-shaped flat jaws |
| Hydraulic Oil Tank Capacity | 2500 |
Ⅲ. Characteristic
Three-line hydraulic cold drawing machine can simultaneously draw three pipes at one time, which is three times the production efficiency of the current single-line drawing machine. It can save energy and reduce consumption. It also has advantages including stable product quality, smooth equipment operation, and safe production.
Ⅳ. Picture
