Packing & Shipping
|
[China]
Trade Verify
Address: Room 3025, Floor 3, Area C, CAS Square, No.488, Anchi Road, Anting Town, Jiading District
Contact name:Vicky
TOBO INDUSTRIAL (SHANGHAI) CO., LTD |
|
Verified Suppliers
|
|
|
Copper Nickel Plate C70600 C71500 Copper Nickel Sheet 10MM Thk
Copper Nickel Plate is a plate which is made up of an alloy of copper and nickel. Due to its chemical composition, the Cuni plate has high resistance to seawater. This is why they are widely used in seawater equipment as they can totally resist barnacle growth, by the formation of a thin layer of tenacious protective film.
The Copper Nickel Sheet is also used in hydraulic tubing and brake tubing. The Cupronickel Sheet can be found in important equipment like seawater cooling, firewater systems, etc. As they show good performance at a high temperature and pressure, the Copper Nickel Alloy Sheet is also an eminent part of heat exchangers and condensers. They can also be found in the cast seawater pumps and various valve components.
The hardness of Cupro Nickel Plate is lesser than the stainless steel plates, which means they are much more flexible. One can easily create forms and flares with Cupro Nickel Sheet for repairing, and unlike stainless steel, these are easy to work with. As the Cupro Nickel Sheet can be bent and flared easily, hence they are capable of creating a tighter seal.
USED:
1)Further making utensil.
2)Solar reflective film
3)The appearance of the building
4)Interior decorating:ceilings,walls,etc.
5)Furniture cabinets
6)Elevator decoraction
7)Signs,nameplate,bags making.
8)Decorated inside and outside the car
9)Household appliances:refrigerators,microwave ovens,audio
equipment,etc.
10)The consumer electronics:mobile phones,digital cameras,MP3,U
disk,etc.
Copper Nickel Alloy Sheet Grades
| ASTM | Trade Name |
| C70600 | Cupro-Nickel 706 (90/10) |
| C71500 | Cupro-Nickel 715 (70/30) |
| Other Alloys available upon request | |
Copper Nickel Plate specifications
| Manufacturing Standard | Cuni Plate : ASTM B122, MILITARY MIL-C-15726 |
| Cu-Ni Clad Plate: ASTM B432 | |
| Copper Nickel Strips: ASTM B122, MILITARY MIL-C-15726 | |
| International Standards | JISH3100-2006, ASTMB75M-02, JISH3250-2006, GB/T1527-2006, JISH3300-2006, ASTMB152M-06, ASTMB187, ASTMB42-02, GB/T5231-2001 etc. |
| Specifications | Thickness: 0.1mm~200mm |
| Width: 10mm~2500mm | |
| Sizes in stock | 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm |
| Length | 10mm~12000mm, or as required. |
| Surface | Mill, polished, bright, oiled, hair line, brush, mirror, sand blast, or as required. |
| Form of | Copper Nickel Plate, Sheet, Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Clad Plate, Rolling Sheet, Flat Sheet, Rolling Plate, Flat Shim, Blank (Circle), hot rolled, cold rolled, annealed, soft annealed, descaled, sheared, tread plate, Checker Plate |
Copper Nickel Plate Chemical Composition
| Element | C70600 | C70620 |
| Cu | Balance | min. 86.5% |
| Ni | 9.0% - 11.0% | 9.0% -11.0% |
| Fe | 1.0% - 1.8% | 1.0% - 1.8% |
| Zn | max. 1.0% | max. 0.5% |
| Pb | max. 0.05% | max. 0.02% |
| Mn | max. 1.0% | max. 1.0% |
| C | max. 0.05% | |
| P | max. 0.02% | |
| S | max. 0.02% |
Cuni Plates Mechanical Properties
| Thickness (mm) | ≤ 140 | |
| * Tensile Strength | min. MPa | 275 |
| * Yield Strength Rt 0.5 | min. MPa | 105 |
| * Yield Strength Rp 0.2 | min. MPa | 105 |
| * Elongation | min. % | 30 |
