Active Member
|
[China]
Address: B15 Unit 502-3, No. 59, Chengyi North Street, Jimei District, Xiamen City, China
Contact name:Belinda Wu
Xiamen Ai Power Technology Co., Ltd. |
|
|
Great Engine 480KW 600KVA UK Diesel Power Generator With Perkins Electric Diesel Generator
Product characteristics:
1. Our cooperate with famous diesel engine -Powered by famous
Perkins engines.
2. Equipped with famous Brushless alternator - Optional Stamford,
Leroy Somer, Marathon, Meccalte.
3. Equipped with 50°C radiator with fan, enough engine cooling
system guarantee long time working
4. Equipped with advanced generator set control system, ATS system,
remote control system, parallel operation system, optional control
model, Deep sea, Smartgen, ComAp,
5. Generator set use High-quality steel are thickness canopy -- 2MM
to 6MM
6. Generator equipped with 24V DC battery with charger, battery
connects wire.
7. New design of turn-back type for air inflow & air outlet
which can reduce the noise and improve engine efficiency.
8. Beautiful & practicably design, Bottom hole for forklift,
Water outlet & oil outlet for easy maintenance
Generator Specifications:
| GENERAL ENGINE DATA | ||||||||||||
| Engine manufacture | Perkins Engines Company Limited | |||||||||||
| Engine brand | Perkins | |||||||||||
| Engine model | 2806C-E18TAG1A | |||||||||||
| Engine speed (rpm) | 1500 | |||||||||||
| Prime power | Standby power | |||||||||||
| Gross engine power (kWb) | 532 | 584 | ||||||||||
| Typical Genset electrical output 0.8pf 25ºC (100 kPa) (KW) | 473 | 520 | ||||||||||
| Cylinders | 6-cylinder, vertical in line | |||||||||||
| Cycle | 4 stroke, comression ignition | |||||||||||
| Induction system | Turbocharged, air to air charge cooling | |||||||||||
| Compression ratio | 14.5:1 | |||||||||||
| Bore * Stroke (mm) | 145*183 | |||||||||||
| Cubic capacity (Litre) | 18.13 | |||||||||||
| FUEL SYSTEM | ||||||||||||
| Injection system | MEUI | |||||||||||
| Governor type | electronic | |||||||||||
| Fuel Consumption (litre/hour) | ||||||||||||
| Standby | 134 | |||||||||||
| Prime+10% | 135 | |||||||||||
| Prime | 129 | |||||||||||
| 75% output power | 96 | |||||||||||
| 50% output power | 63 | |||||||||||
| COOLING SYSTEM | ||||||||||||
| Max. top tank temperature(standby) (°C) | 103 | |||||||||||
| Thermostat operating range (°C) | 88-98 | |||||||||||
| LUBRICATION SYSTEM | ||||||||||||
| Total system capacity (liter) | 62 | |||||||||||
| Maximum sump capacity (liter) | 53 | |||||||||||
| Minimum sump capacity (liter) | 45 | |||||||||||
| Oil temperature at normal operating conditions (°C) | 95 | |||||||||||
| Oil temp. Max. continuous operation (°C) | 113 | |||||||||||
| Oil pressure at rated speed (kPa) | 420 | |||||||||||
| Oil pressure Minimum @80°C (kPa) | 200 | |||||||||||
| INDUCTION SYSTEM | ||||||||||||
| Maximum air intake restriction of engine (kPa) | 3.7 | |||||||||||
| Combustion air flow(standby/prime power) (m3/min) | 41 / 40 | |||||||||||
| EXHAUST SYSTEM | ||||||||||||
| Back pressure for total system (kPa) | 6.9 | |||||||||||
| Exhaust gas temp. after turbo(standby/prime power)(°C) | 565 / 550 | |||||||||||
| Exhaust gas flow (standby/prime power) (m3/min | 115 / 110 | |||||||||||
| ELECTRICAL SYSTEM | ||||||||||||
| Alternator voltage (volts) | 24 | |||||||||||
| Alternator output (amps) | 70 | |||||||||||
| Stater motor type (volts) | 24 | |||||||||||
| Starter motor power (kw) | 9 | |||||||||||
| Alternator output (amps) | 70 | |||||||||||
| Stater motor type (volts) | 24 | |||||||||||
| Starter motor power (kw) | 7.5 | |||||||||||
Detection and protection function
Over / under speed, Low Oil Pressure, High Water Temperature, under Battery Volt, Low water level,Three failed to start alarm
Over / under voltage,Over current,Over / under frequency, Over Power, Short circuit
Optional features
RS485 (DSE7320)RS485(DSE7320)
Fuel level display and low-alarm
Water level low-alarm
Water Pre- heating in low temperature
ATS
Automatic parallel (DSE6120 / DSE7320)
Other self-definition functions
big power 1mva silenced diesel generator set price
1.What is your MOQ, payment method, delivery time?
Answer: Our MOQ is only 1 set. Payment method usually is 30% T/T as
deposit, 70% balance T/T before delivering.
Or 100% L/C, trade assurance, paypal, western union. Delivery
period normally will be 15~30 days after receiving customers'
deposit.
2. How about your guarantee?
Answer: Our warranty period is 1 year or 1000 running hours,
whichever comes first.
3. Is there any spare parts you can provide along with generators
to make the maintenance convenient?
Answer: We can provide regular engine's air filter, water filter,
fuel filter, oil filter to customers for self-maintenance.
4.Can you offer parts to us if we need?
Answer: Yes, we can offer parts to you at any time, not limited in
warranty time. usually the parts can be sent out during 3-5days.
