Lithium Battery Machine combination welding
The equipment introduction:
Suitable for electric vehicle battery pack, car battery module, street lamp battery, balance car battery pack, scooter battery pack, mobile power supply, starting battery pack module, power tool battery pack, notebook battery pack, etc., various battery combinations.
1. Support breakpoint startup, automatic startup and manual startup mode conversion.
2, simple programming, support any point programming and array programming, can achieve gap spot welding, single point, double point mode quick switching, spot welding path optimization, improve efficiency, local disk can store 99 sets of programming files, USB interface can be graphically imported.
3. The system is divided into operators, administrators, super users, etc. to enter the screen, which is convenient for the use, management and maintenance of the welding machine.
4. The inverter DC welding power supply is adopted, the performance is stable, the welding speed is fast, and the constant current working mode is eliminated to eliminate the unstable factor of long-term welding current.
5. Comes with welding current monitoring system, which can monitor welding current in real time.
6. Spot welding power supply has a virtual welding alarm function, which can directly communicate with the motion controller to record the virtual welding position, and the welding needle replacement forecast reminder.
7. The welding efficiency is about 8 times that of labor, high stability, labor saving, time and cost.
Technical parameters of the equipment:
X-axis travel | 0-500mm | Maximum speed of motor transmission | 1500mm/s |
Z1 axis travel | 0-300mm | Maximum load cell | 300pcs(20*15) |
Z2 axis travel | 0-300mm | The number of filegroups that can be stored | 99 group |
Welding speed | 0.5Seconds/dot; 3000-3600PCS/h | operating system | Motion controller HMI |
Transmission mode | Spindle servo motor + lead screw + linear guide | Dimensions(mm) | 980L*1260W*1700H |
Spot welding head | Servo motors | Repeatability | ±0.02mm |
Welded nickel strip thickness | 0.1-0.3mm;0.2mm Slit or punch the bump above |