IP65 Solar Panel Street Light ABS Lamp Body For Road Highway LED Source

IP65 Solar Panel Street Light ABS Lamp Body For Road Highway LED Source

Solar Led Street Light Benefits

· No line voltage, trenching, or metering

· No power outages

· Battery backup for cloudy or rainy days

· Distributed light and power - no single point of failure for enhanced security

· Easy to install with quick connect plugs - less than 1 hour

· No scheduled maintenance for up to five years

· Qualify for savings from various state and federal taxes and incentivizes

· No monthly electric bills

· Controlled charging to prolong battery service life

· Long-life PV modules with more than 25 years of power generation capacity

· Environmentally friendly - 100% powered by the sun, solar panels reduce fossil fuel consumption, eliminating pollution

· Self-contained solution - Light on/off controlled by automatic daylight sensing or hour preset, no running or maintenance cost

· Better light source - LED lights feature cool white light without flickering and

higher brightness than sodium lights

Installation:

All-in-one solar street light is the fastest and easiest way to install solar lighting and transform your area into well enlighten one. Use the simple connection interface to install in any pole in a professional way in the least amount of time possible.

If you can connect a cable,you can install a solar lighting solutionin less than 10 minutes.

Make the solar panel face south while installing. Meanwhile, you can adjust the angle between the lamp head and level (as follow), you’d better reconcile the lamp head with local latitude.

Where to place the light pole?

To place the light pole into the best spot with good day lighting.The light pole should be the length 4-6m, the thickness 2.0mm with material iron or steel, the diameter 50-90mm.
Unfold the knob of fuse ( see below ) and take out the insulating film if the fuse sockets, to check up if the fuse working right or not, and then tighten.
Place the lamp on the pole by its sleeve, special screw should be used and steady installation should be ensured.

One Stop Easy Installation

All In One Integrated solar LED street lights, are widely used as street lighting, road lighting, garden lighting, landscape lighting, parking lots lighting, courtyard lighting etc. The All In One Integrated solar street lights are the high cost effective solution with lower initial investment and free from labor cost on earthwork construction and installation of batteries, solar panels, and accessories.

No earthwork construction for battery, no labor installation for solar panels and connections, leads to lower initial investment than traditional solar street light system.

80% Energy Saving & ZERO energy cost

As high as 200 lumen/watt system lighting efficiency, 80% energy saving compared to traditional lights. 100% electricity from solar leads to ZERO energy cost of operation.

3-7 Lasting Days in Rainy and Cloudy Days

The light output of full brightness or DIM mode half brightness is controlled by PIR motion sensor detecting any movements.

Solar Led Street Light Specification:

FAQ

1. Are you manufacturer?

Yes,Lasom Lighting team have over 30 experience in lighting business.

2. Can you produce according to the samples or drawings?

Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures

3. What is the lead time?

It usually takes 25 to 35 days after sample confirmation and receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.

4. What is your terms of delivery?

We accept EXW,FOB,CIF,etc. You can choose the one which is the most convenient or cost effective for you.

5. How to solve the quality problems after sales?

Take photos of the problems and send to us. We will make a satisfied solution for you within 24 hours after we confirm the problems.

6. Do you have any MOQ limit for led light order?

Low MOQ, 1pc for sample checking is available.