High Precision Stone Crusher Machine Parts Long Long Life Maintenance Free

High Precision Stone Crusher Machine Parts Long Long Life Maintenance Free

Product description:

Cone crusher straight sleeve, crusher cone sleeve, crusher bowl shaped tile sleeve, crusher drive bearing, crusher lower thrust plate and other crusher accessories. Copper sleeve is an important part of cone crusher, such as eccentric shaft copper sleeve, moving cone copper sleeve and horizontal shaft copper sleeve, which play a very important role in the operation of the equipment.

Copper sleeve is an important part of cone crusher, such as eccentric shaft copper sleeve, moving cone copper sleeve and horizontal shaft copper sleeve, which play a very important role in the operation of the equipment. Let's take a look at the replacement of copper sleeve of cone crusher.

Replacement of copper sleeve of eccentric shaft

After the lock packing is drilled and broken, the eccentric sleeve can be inverted to take out the copper sleeve. Before installing the new copper sleeve, it is necessary to check whether the inner hole size of the eccentric sleeve has cracks. When installing the copper sleeve of eccentric shaft, it can be cooled by dry ice. When pouring the locking packing, the eccentric sleeve and copper sleeve must be placed at a temperature of about 70 ℃, and the oil holes of the eccentric sleeve and copper sleeve must be aligned.

Replacement of moving cone copper sleeve

The copper sleeve under the moving cone can be sawed off, but make sure not to damage the inner hole of the moving cone. The copper sleeve on the moving cone can be pulled out directly, and can be cooled with dry ice to speed up the pulling out speed. During installation, the moving cone copper sleeve can be cooled with dry ice for at least 2 hours. When the cooling is sufficient, the copper sleeve shall be lifted with its lifting ring, and the flat gasket shall be used under the lifting ring to ensure that the edge of the copper sleeve is parallel to the bottom edge of the moving cone.

Replacement of copper sleeve of horizontal shaft

The outer copper sleeve can be taken out by a self-made pulling device, and the inner copper sleeve can be removed by hammering with a central rod device. After the copper sleeve is removed, it is necessary to check whether the inner hole size of the axle frame is reasonable. When installing the copper sleeve of horizontal shaft, use dry ice to shrink for at least 2 hours

Product Specification;

Applicable Industries:
Applied in: diesel engine, automobile, agricultural machinery, hydraulic machinery, machine tools, forestry machinery, construction machinery,

mining, railway, ship, petrochemical machinery, die-casting machine, metallurgical equipment; food packaging machinery, textile, light industrial

machinery and aviation, weapons and other industries and departments of various machines.

Please read the following carefully. It may save you a lot of time and money.

1. Our products are all self-produced and self-selling, the same quality, compared to other families to preferential - ---

professional production customization.

2, as like as two peas or centrifuge, the products produced by our company are made of blank according to the manual

formula, and then processed by the whole NC program. The material and size accuracy are guaranteed. There are many

products on the market. The picture looks exactly the same, but the inferior material with less than 50% copper content is used.

Table lathe processing, so that the accuracy of the product can not be guaranteed, the future will bring you a lot of trouble in the installation and use.

After the completion of the product, our logistics personnel are required to clean, wipe oil, pack film, load wooden cases and other processes. It's packed in wooden cases. The boards are fumigated and meet the export standards