Active Member
|
[China]
Address: NO. 498 XINGLIN BAY ROAD JIMEI DISTRICT XIAMEN CHINA
Contact name:Maggie
Xiamen LTMG Co., LTD |
|
|
fork lift truck machine 10 ton diesel container forklift with 3m lifting height
10 ton forklift Feature
Forklifts are widely used in port, railway station, airport, freight yard, factory workshop, warehouse, distribution center and distribution center. Handling, loading and unloading of pallet goods in cabins, cars and containers are essential for pallet transportation and container
transportation. device
Load Capacity:
1) the higher you are lifting a load the lower the capacity will become.
2) if you add an attachment this will also effect the unit's capacity.
3) Non-standard over sized goods will cause load centre move forward to effect capacity.
Lift Height & Collapsed Height:
besides how high you want to lift up your material, you also need to pay attention to forklift collapsed height for reasons: low doors you need to passby, ceillings in the building you are working, ceillings in the trucks you are loading/unloading.
Environment:
1) depending on enviroment in door or outdoor: diesel, gas/LPG or battery forklift
2) ground in good condition or with stones or scraps everywhere: what types of tire is proper, air tires, solid tires or no-marking tires?
3) special environment: cold storage etc
Application:
whether or not an attachment needs for working.
Others:
Do I need to stack goods in narrow warehouse? right-angle stack aisle width
Do I need a pressure regulator valve when forklift reserved with 3rd or 4th valve for attachments?
The specification of 10 ton forklift
| Features | 1 | Manufacturer | LTMG | ||
| 2 | Model | FD100 | |||
| 3 | Load capacity | kg | 10000 | ||
| 4 | Load center | mm | 600 | ||
| 5 | Power unit | Diesel | |||
| 6 | Operator type | Driver/seat | |||
| 7 | Tire type | Pneumatic | |||
| 8 | Wheel | Front/rear | 4/2 | ||
| Dimension | 9 | Max. lifting height | mm | 3000 | |
| 10 | Free lift | mm | 205 | ||
| 11 | Fork size | L*W*T | mm | 1220*175*75 | |
| 12 | Tilt range | Mast forward/backward | deg | 6/12 | |
| 13 | Overall length(without fork) | mm | 4255 | ||
| 14 | Total width | mm | 2245 | ||
| 15 | Mast height (fork lowering) | mm | 2850 | ||
| 16 | Overall height fork raised | With backrest | mm | 4330 | |
| 17 | Height to head guard | mm | 2560 | ||
| 18 | Turning raduis(outside) | mm | 3900 | ||
| 19 | Front face of fork to front axle | mm | 710 | ||
| 20 | Min. right angle stacking aisle | pallet size :1100×1100 add clearence | mm | 6250 | |
| Performance | 21 | Speed | Max Travelling full/no load | km/h | 24/30 |
| 22 | Lifting full/no load | mm/s | 390/410 | ||
| 23 | Lowering full/no load | mm/s | 470/340 | ||
| 24 | Max.drawbar pull | full/no load | kg | 5850/3200 | |
| 25 | Gradeability at 1.6km/h | full load | % | 22 | |
| Max. Gradeability | full/no load | % | 24/20 | ||
| Weight | 26 | Truck weight | kg | 12450 | |
| 27 | Weight distribution | Full load front/rear | kg | 20160/2290 | |
| 28 | No load front/rear | kg | 5480/6970 | ||
| Frame | 29 | Tires | Number | front/rear | 4/2 |
| 30 | Model | front axle | 9.00x20-14PR | ||
| 31 | rear axle | 9.00x20-14PR | |||
| 32 | Wheelbase | mm | 2800 | ||
| 33 | Tread | Front/rear | mm | 1600/1700 | |
| 34 | Ground clearence | At lowest point(mast) | mm | 245 | |
| Frame | mm | 320 | |||
| 35 | Brake | Service brake | power brake | ||
| Parking brake | Mechanical-hand lever | ||||
| Engine | 36 | Battery | Voltage/capacity | V/AH | 2x12V-80AH |
| 37 | Engine | Model | ISUZU 6BG1 | ||
| Rated power | kw/rpm | 82.3/2000 | |||
| Rated torque | N-m/rpm | 418/1500 | |||
| Number of cylinders | 6 | ||||
| Displacement | L | 6.494 | |||
| Fuel tank capacity | L | 140 | |||
| 38 | Transmission | shift stage(front/rear-type) | 2-2 automatic | ||
| 39 | Operating pressure | Hydraulic system pressure | kg/cm² | 200 |
After-sale service
Nowadays more than 60 agents around the world can supply LTMG
professional after-sale service.
All the products of LTMG supplied with one year or 2000 workling
hours (which occurs first) period quality warranty.
Detail clauses and policies please see to our website and product’s
quality certificate.
Our company
FAQ:
1.What Certificate do you have?
LTMG workshop meet with the ISO9001:2008 Quality System.
All of our products with CE certificate. Some of our products meets
the EPA requirements.
2. Can you customize and design as the clients' requirement?
LTMG will try its best to meet all kinds of clients' special
requirements.
However, All the customizing and refit should be implemented safely
and scientifically.
The colors can be painted as client's need.
3.How long is the warranty of your products?
Normally 1 year or 2000 working hours whichever occurs first.
Details to see the LTMG warranty policy for each model.
4. Can you produce the products labeled with the client's brand?
With the authorization of the brand, we can OEM for our clients.
5. What payment terms do you accept?
Normally 30% T/T in advance as deposit, blance paid before
shipment.
100% L/C at sight issued by world famous bank with good faith is
also available.
6.Delivery time:
Standard configuration products are always in stock.
The production period of Customizing products is 30 days.
