Home Companies Liyuan Technology (Guangzhou) Co., LTD

0.7*2.5mm Pressboard Die Cutting Creasing Matrix Channel For Box Making

Active Member

Contact Us

[China]

Address: No.717B, 2th Building,Tian An Cyber Park, No.1 Jian Ping Road, Guicheng, Nanhai

Contact name:Christina

Liyuan Technology (Guangzhou) Co., LTD

0.7*2.5mm Pressboard Die Cutting Creasing Matrix Channel For Box Making

Country/Region	china
Categories	Offset Paper

Product Details

0.7*2.5mm Pressboard Die Cutting Creasing Matrix Channel For Box Making

Product Description

Specification:70cm/pc, 50pcs/box

Material: pvc
Withstand voltage frequency:around 30000-50000 times for cardboard
Applicable machines: flatbed die cutting machine
Applicable products: kraft paper, gray cardboard, PVC sheet, corrugated cardboard, mounting paper, color box, gift box, etc

Product Parameter


Common Specification H*W(mm)
0.3*0.8	0.4*0.8	0.5*1.0	0.6*1.0	0.7*1.5	0.8*1.7	1.0*2.3	1.2*3.0	1.4*4.0
0.3*1.0	0.4*1.0	0.5*1.2	0.6*1.2	0.7*1.7	0.8*1.9	1.0*2.5	1.2*3.2	1.4*4.5
0.3*1.2	0.4*1.2	0.5*1.3	0.6*1.3	0.7*1.9	0.8*2.1	1.0*2.7	1.2*3.5	1.4*5.0
0.3*1.3	0.4*1.3	0.5*1.4	0.6*1.4	0.7*2.1	0.8*2.3	1.0*3.0	1.2*4.0	1.4*6.0
0.3*1.4	0.4*1.4	0.5*1.5	0.6*1.5	0.7*2.3	0.8*2.4	1.0*3.2	1.2*4.5	1.4*7.0
0.3*1.5	0.4*1.5	0.5*1.6	0.6*1.6	0.7*2.5	0.8*2.5	1.0*3.5	1.2*5.0
	0.4*1.6	0.5*1.7	0.6*1.7	0.7*2.7	0.8*2.7	1.0*4.0	1.2*6.0
	0.4*1.7	0.5*1.9	0.6*1.9	0.7*2.8	0.8*3.0	1.0*4.5
	0.4*1.9	0.5*2.1	0.6*2.1	0.7*3.0	0.8*3.2	1.0*5.0
		0.5*2.5	0.6*2.3	0.7*3.2	0.8*3.5	1.0*6.0
		0.5*2.7	0.6*2.5	0.7*3.5	0.8*4.0
			0.6*2.7	0.7*4.0	0.8*5.0
			0.6*3.0		0.8*6.0
			0.6*3.2
			0.6*3.5
			0.6*4.0
			0.6*5.0

Installation steps

1,Measure the length of the scoring steel wire on the wooden mould

2,Cut the creasing strip according to the measured length, and the
ends are pressed into a 90-degree sharp angle

3,Apply the positioning plastic strip on the creasing line

4,Peel off the adhesive tape

5,Install it on the die cutting machine for trial, and the creasing
matrix is positioned on the steel plate

6,Peel off the positioning plastic strip

FAQ

Q1: Are you trading company or manufacturer?
A1: Our factory is a professional manufacturer of industrial blades for more than 20years.Our blades are mainly used in: packaging, paper, rubber, optoelectronics, electronics, light industry, printing, metallurgy, and other machines.

Q2: What is your blade hardness?
A2: Different material has different hardness, from 48HRC to 68HRC, we can supply all of these. You can describe the use, we'll provide suitable suggestion for you.

Q3. Where were cutting blades exported before?
A3: Our industrial blade have been exporting to over 40 countries, including: Vietnam, Thailand, Myanmar, Philippine, Malaysia, Indonesia, India, Egypt, Emirate, Bahrain, Saudi Arabic, Israel, Russia, Lithuania, Mexico, Brazil, Argentina, Venezuela, Honduras, Korea and etc.