Active Member
|
[China]
Address: Room 1320, Building 17, Baolong City Plaza, No.97, Fuzhou South Road, Jiaozhou City, Qingdao City, Shandong Province, China
Contact name:Bonnie Li
Qingdao Yonghui Packaging Machinery Co.,Ltd |
|
|
Tungsten Carbide B Flute Regrinding Corrugating Rolls
Production Process
Clean and Inspect after receiving old rolls⇒ Give suggestion for the flute height ⇒ Remove old tungsten carbide coating⇒Machining bearing position⇒Finish grinding ⇒Testing flute profile⇒Sand blasting⇒Tungsten carbide spraying ⇒Flute profile testing⇒Polishing ⇒ Final testing⇒Pack
Flute profile
The most important parameter is the flute profile. To design the flute profile, we must know the corrugated paper gsm, speed, flute height, correct diameter and other requirement such as good FCT, saving paper, etc. Our engineer has rich experience of designing flute profile. Without good design, many problems will appear, such as flute paper broken, low speed, collapsed flute, high-low flute and so on.
The following table is just for a reference.
| Flute | Profile | Height(mm) | Pitch(mm) | Flutes/300mm | T.U.R |
| A | UV | 4.5-5.0 | 8.0-9.5 | 34±3 | 1.45-1.52 |
| C | UV | 3.5-4.0 | 6.8-7.9 | 41±3 | 1.37-1.47 |
| B | UV | 2.5-3.0 | 5.5-6.5 | 50±4 | 1.33-1.41 |
| E | UV | 1.1-2.0 | 3.0-3.5 | 93±6 | 1.24-1.36 |
| F | UV | 0.8-1.0 | 2.2-3.2 | 115±20 | 1.19-1.25 |
| G | UV | 0.6-0.8 | 1.8-2.8 | 136±20 | 1.15-1.20 |
| N | UV | 0.4-0.6 | 1.2-2.2 | 193±55 | 1.10-1.15 |
| Others | UV | Customized | Design | Design | Design |
