Active Member
|
[China]
Address: MIANFANG ROAD, DONGGUANG COUNTY, HEBEI PROVINCE, CHINA
Contact name:Annabelle Li
CANGZHOU JCS PACKAGING MACHINERY CO., LTD |
|
|
Vacuum Suction Feeder PLC Control Corrugated Box Flat Die Cutting Making Machine
Main Feature
1. The extra feeder can do paper and corrugated board. Install the
vacuum pump of BECKER.
2. At the middle of head install the monitor ,worker can easily see
the back
3. Pre-paper pile design and special pneumatic bench can save much
time
4. The non-stop sampling system can check the board accurate
without stop the machine.
Paper feeding Unit
1. Adopt automatic centralized lubricating system and setting main
chain lubricating system by HMI
2. Patented design shock absorption system can prolong the life of
main body and increase the pressure
3. The intermittent gearbox made in Taiwan can assure the accurate
registration and decrease the gripper attack.
Die-cutting unit
1. Die-cutting chase fixed accurately by pneumatic lock system.
2. Die-cutting plate is putted in and out by air floating device.
3. Electric clutch system of main chain can assure the chain steady
when it is stopped at high speed.
4. Main chain and assist chain is lubricated periodically
controlled by PLC.
5. Protection window of die-cutting can hold the main body clean.
Data
Model | JCS-PYP-A1500 |
Die cutting type | Pressed flat die cutting(Lower side is movable while upper side is
unmovable) |
Max paper transmitting size | 1510*1120mm |
Min paper transmitting size | 450*500mm |
Max die cutting size | 1490*1100mm |
Min gripper size | 8mm |
Max die cutting pressure | 400N/cm² |
Paper processed Ivory board Corrugated board | 0.1-0.3mm Less than 8mm |
Die cutting precision | ±0.1mm |
Max die cutting speed | 4600sheets/h |
Max feeding pile height | 1400mm(above the level) |
Min feeding pile height | 1250mm(above the level) |
Total power | 18kw |
Total weight | 19.5T |
Overall size | 6870*2398*2356mm (Not including the pedal) |
