Single Facer Line With Electric Mill Roll Stand

ZJ-F shaftless mill roll stand

Structural features:

1. Symmetrical structure can also install two bundles of paper at the same time,Paper can be used for non-stop for a job；Adopts mechanical drive to complete the paper clamping, lifting, loosen, move on, around translational motion, etc.

2. each shaftless mill roll stand is equipped with two pieces of paper guide, two set of paper car；paper guide the use of channel 14 and the guide post weld,paper car adopt 10mmwelded stell,the length of track is 4500mm.

technical parameters:

1. Backstands action mode:mechanical electric operation

2. the range of paper jams:maximum:1800mm minimum:600mm

3. the diameter of paper jams:maximum:￠1400mm minimum:￠400mm

YK-280S fingerless type single facer(Steam heating)

structural feature:

1. base and wallboard cast iron wall, Wallboard thickness130mm.universal Joints.

2. corrugated roller material adopt 48CrMo Alloy steel.

3. pressure roller ¢ 284mm,surface grinding and chrome-plated; cylinder control and remove up and down

4. pneumatic control glue to glue back, glue roller diameter ￠215mm,Engraved polished surface after a 36-line pit style textured machined chrome plated,after scraping the roller surface polished hard chrome plated.

regular technical parameters:

1. effective width:1600mm

2. operation direction:left or right(determined in accordance with customer plant)

3. design speed:100m/min working speed:60m/min

4. temperature range:200—260℃

Rotary paper receiving machine:

1. the maximum length of the machine to receive paper 1350mm.

2. the machine can achieve automatic points without stopping, automatic stacking, automatic sub-stacker.

3. the machine receiving the highest speed 70m / min.