Water Base Ink High Defination PLC Touch Screen Control
Carton Box Making Machine With Printer
Whole introduction
- Designed according to high request and reliable function,
humanization operation that can setting, revision, implement,
changing and memories in short time, and display data.
- All of drive rollers are made of high quality steel, quenching and
high temperature tempering, hard chrome plated the surface with
grinded.
- Drive gears adopt high quality steel with heat treatment and grind,
accurately, lower noise.
- The main drive roller adopt keyless connect, decrease the
connection gap, ensure printing precision.
- Engineer oil automatic balance device, keep the oil level equal in
each unit.
- Full Computer control system PLC combine with touch screen set size
regulating phase and so on. It can remember and save order
function.
- All roller gas adjusted by PLC with touch screen control.
- It adopts roll type lead edge feeding.
- Main motor is VFD, die-cutting unit equipped one independently
servo motor driving. Feeding unit
| Model | GYKM405-2600 | GYKM480-2600 |
| Machine inside width (mm) | 2600 | 2600 |
| Max feeding paper size(mm) | 1200*2400 | 1450*2400 |
| Max effective printing size(mm) | 1200*2200 | 1450*2200 |
| Min coverage size(mm) | 350*500mm | 350*500mm |
| Min slotting space(mm) | 190*50*190*50 | 190*50*190*50 |
| Design speed | 180pcs/min | 150pcs/min |
| Working speed | 160pcs/min | 130pcs/min |
| Standard Thickness of printing plate | 6mm | 6mm |
| Printing precision | ±0.5mm | ±0.5mm |
| Thickness of cardboard | 1.2-9mm | 1.2-9mm |
| Wall thickness | 50mm | 50mm |
| Main motor power | About 11kw | About 11kw |
Lead edge feeder
- Adopts roller type lead edge feeding combined with vacuum system.
Adjust wind volume according on cardboard bending degree to ensure
feeding paper smoothly.
- Main motor start protecting device, when the machine units not be
clocked, machine can’t run.
- Double feeding rubber roller, the rubber roller has slot for
prevent the overlarge pressure.
- Front feeding rubber roller with air cylinder cushioning device,
feeding accurately and stable, will not destroy the hardness of the
cardboard when the feeding space is small.
- The side baffles adopt motorized digital control. The back baffle
box be adjusted by motorized, the front baffles space adopts manual
adjustment.
- With brush dust-remove device with dust-absorption blower. Can
adjust the wind volume accord the cardboard size.
- Electric control units separation with warming belt, to ensure
worker safe.
- Electric counting device set production quantity, when complete the
production automatically warm( if use touch screen control, adjust
quantity though touch screen directly)
Printing unit
- The printing roller used of stemless steel pipe do quenching and
high temperature tempering, the surface be grinded, hard chrome
plated, balance correction, running smoothly.
- With quickly change printing plate device, when load or unload
printing plate, foot switch electric control roller run clockwise
or anticlockwise.
- The feeding roller, impression roller, rubber roller and anilox
roller space adjusted by self-locking device.
- Printing and phase fixed device, pneumatic brake. When units
separating or cleaning, braking mechanism limit gear running, keep
original gear’s position.
- The anilox roller adopt automatic pneumatic up-down device( when
feeding, anilox roller down automatically according to order, when
stop, anilox roller lift according order)
- Adopts pneumatic diaphragm pump inking, automatically recycle,
water cleaning.
- With “clean printing plate” function, after washing the printing
plate, the printing roller will back to the original printing
position.
Die-cutting unit
- The rubber roller adopts mechanical screw type horizontal movement,
the movement distance is 50mm, with double case.
- Used computer with PLC adjust phase of die roller, set box size and
so on.
- The space adjustment between rubber roller and die roller adopt
self-locking device, and with air cylinder adjust quickly in large
range, reduce rubber destroy, prolong rubber use life.
- Feeding roller spaces adjusting adopts self-locking device.
- Speed compensation device can make the rubber roller slipping
follow die roller, thereby, the rubber surface speed controlled by
knife die. So that the carton shape is same as knife die.
- Equipped with rubber repair device, the rubber can be used after be
repaired.
- With steel slotting ring that 4ring adjusted together.
Waste vibrator
Stacking Unit
- The paper catching arm can be automatically operated or by hand.
Installed with safety mechanism to prevent the paper catching arm
from sudden dropping and to ensure the safety of the operating
personal.
- The lathe platform rising up and dropping down is driven by the
power chain.
- With rising of the card board piles the lathe platform can
automatically regulate the tilting height. The elevator attaches
the brake function to make the lathe platform to keep the fixed
position and not to slide.
- Pneumatic paper lifting mechanism. When the card board have piled
to the planned height, the paper catching holding plate will be
open automatically, the pedestal will hold the card boards.
- The surface corrugation leather belt can prevent the Cardboard to
slide.
