Home Companies Shenzhen Coolmay Technology Co., Ltd.

Big Size 6.5A 150W PLC Switch Mode Power Supply 89% Efficiency

Contact Us

[China]

Trade Verify

Address: #526, Block E, Building 5, Software Industry Base, Nanshan District, Shenzhen , China, 518061

Contact name:Sandra

Shenzhen Coolmay Technology Co., Ltd.

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

Big Size 6.5A 150W PLC Switch Mode Power Supply 89% Efficiency

Country/Region	china
City & Province	shenzhen
Categories	Switching Power Supply

Product Details

Big Size 6.5A 150W PLC Switch Mode Power Supply 89% Efficiency

Big Size 150W 6.5A DC24V PLC Power Supply Switch Power Adpater

Features:

Advanced PWM pulse width modulation technology.
Imported switching power s upply dedicated driver chip.
Soft start current, effectively reducing transient voltage surges.
High temperature electrolytic capacitors are used to ensure system reliability.
120% full load aging test with strong output.
Built-in EMI and filter. Ripple and noise are minimal.
Short circuit protection, overload protection, over voltage protection and other functions.
Natural heat dissipation, stable performance and high reliability.
Average trouble-free working time up to 100,000 hours.

Parameters:

Article	CX6024-12-5	CX2024	CM6024	CM15024
Dimension	859036mm	659036mm	903260mm	1599738mm
Connection mode	7.62 Barrier terminal	7.62 Barrier terminal	5P-7.62 Barrier terminal	7P-9.5Barrier term
Input voltage	1A	0.8A	2.5A	6.5A
Output efficiency	86%	85%	86%	89%
Installation	Standard guide rail's installation, can be installed on NS357.5or NS35 guide slot			screw fixation, vertically or parallel installation
Impulse current	30A/230VAC			60A/230VAC
Input frequency	47~63Hz
Input voltage	88~264V AC/125~373V DC (Withstand 300 VAC surge input 5S, no damage)
Output voltage	DC24V/DC12V/DC5V	DC24B
Output accuracy	±1%
No-load consumption	<0.5w
Life time	100000 hours at room temperature 25 ° C
Overload protection	Rated output 110%~180%, hiccup protection mode, automatic recovery after load abnormal condition removal
Overvoltage protection	27.6～32.4V
Short circuit protection	Automatic protection when the output is short-circuited (LED off), automatically restored after the short-circuit is released
Insulation withstand voltage	I/P-O/P: 3KVA, I/P-FG: 1.5KVA, O/P-FG: 0.5KVA,1 minute
Working environment	working environment-20～+70° C / working humidity20～90%RH
Storage environmen	No condensation, storage temperature -40 ~ +85 ° C / storage humidity 10 ~ 95% RH

Detail Pictures:

Attention:

Please confirm the input voltage range (88~264V AC/125~373V Dc) of the product andre-energize after correct wiring to avoid damage.
When installing this product, be sure to tighten the screws or clamp the guide rails toavoid falling off.
Avoid wiring, plugging and unplugging the cable in the live state, otherwise it may cause electric shock or circuit damage; when the product emits odor or abnormal sound, please disconnect the power immediately; do not make metal chips and wire heads when processing and wiring the screw holes. Into the ventilation holes of the power supply, this may cause product failure and mis-operation.
The grounding terminal on this product must be properly grounded to improve the anti-interference ability.

FAQ:

1) Are you a manufacturer or trade company?
We are manufacturer of PLC,HMI,HMI PLC combo and other industrial products for over 16 years, we have engineers for study & design
and workers for produce and operate etc, we could support you one-stop products and service.
2) Do you have a CE certificate?
Yes, for the products we exported, we could offer the CE for your Customs.
3) How long about the delivery?
It depends on the order details, and usually, we could support the delivery within 2-7 working days after payment confirmed.
4) Payment terms:
We accept TT Bank Transfer, Paypal, Credit Card on Alibab, Western Union ect.