|
[China]
Trade Verify
Address: #526, Block E, Building 5, Software Industry Base, Nanshan District, Shenzhen , China, 518061
Contact name:Sandra
Shenzhen Coolmay Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
7 Inch HMI PLC Allinone QM3G-70FH Programmable Logic Controller
With Touch Screen
In the field of personalized applications, coolmay technology
provides users with a PLC application platform to create
high-performance industrial integration control solutions for
users, saving time and cost for users, improving efficiency and
enhancing corporate competitiveness.
PRODUCT DESCRIPTION of HMI PLC ALL IN ONE
Feature:
1. Support several high-speed counting and high-speed pulse.Acceleration and deceleration are independent.The total high-speed
counting and pulse can not exceed 480KHz
2. 32K steps program capacity.32K power-off retentive registers.support interrupt.linear and circular interpolation.PID
self-adjusting
3. Special encrvotion.Set password as 12345678 to thorouahly
prevent readina dataPLC only supporls 8-bit password encryotion
4. PLC is compatible with programming software GX Developer8.86Q and GX Works2and HMl is mView software.
5. The network module can be selected accordina to customer
reauirements to realize remote control More models are supported to
customize if bulk order.
| Model | QM3G-70FH |
| Dimension | 200*146*36mm |
| Cutout size | 192*138mm |
| Input | 24VDC |
| Power Consumption | 6-7W |
| HMI | |
| Feature | 60K colors resistive touch screen, supports portrait display |
| Type | 7.0"TFT |
| Display size | 154*87mm |
| Resolution(pixels) | 800*480 |
| RAM | 64MB (Please inquire if requires storing historical data) |
| ROM | NOR Flash 16MB |
| CPU | 32bit CPU 408MHz |
| COM ports | Type-C HMI download port (can download PLC program through the USB penetrating function), RS232 port |
| Software | Coolmay TPWorks HMI Programming Software |
| PLC | |
| I/O level | - Input: Passive NPN, public terminal isolated - Transistor output: Low level NPN, COM connect to negative - Relay output: Normally open dry contact |
| DO type and load | - MT: 2A/point, 4A/4 points COM; MT: 0.5A/point, 0.8A/4 points COM, 1.6A/8 points COM - MR: 2A/point, 4A/4 points COM, 5A/12 points COM. |
| High-speed counting | Single phase 6 channel 60KHz, or 2 AB 60KHz + 1 AB 10KHz, or 2 ABZ 60KHz + 1 AB phase 10KHz |
High-speed pulse (Only for MT models) | 8 channels, Y0-Y3 is 100KHz, Y4-Y7 is 10KHz. High-speed counting + high-speed pulse < 480KHz |
| COM port | 1x TYPE-C, 1x RS232, 1x RS485 |
| Software | Compatible with GX Developer8.86 and GX WORKS 2 |
| Detailed info. refer to: “Coolmay QM3G-FH All-in-One User Manual”, “Coolmay CX3G/FX3GC PLC Programming Manual”, “Coolmay TP HMI User Manual” | |
Packaging
The products will be under testing for 1-3 days and packed with carton box .
FAQ
1.Precautions of using PLC transistor and relay
The PLC output is a common cathode output, the theoretical value is
1A, the actual use is less than 500mA, the COM wiring is negative,
please use 24V voltage, there is no voltage output when it is used
as a switch. If an external relay, the relay needs an external
power supply.
The relay has a contact life, the theoretical value is 30W times,
and the theoretical value of the external load does not exceed 5A.
Frequently, the full load current may affect the service life, and
there is no voltage out.
2.Precautions of Coolmay PLC output type selection
MT: indicates the transistor output, MR: indicates the relay
output, and MRT: indicates the relay transistor mixed output.
The main differences between transistor output and relay output
are:
(1)The difference in current load. At present, we use a transistor
with a maximum current load of 500MA, and the maximum current load
of the relay is 5A (the maximum relay current of the
EX2N(S)/DX2N(S) series PLC is 3A);
(2)Output power: The transistor can only be connected to the DC24V
power supply , and the relay can be connected to the DC24V and
AC220V power supply ;
(3)Functional characteristics: If you need to send a pulse to drive
a stepper motor, you should use the transistor output or the mixed
output. Also if the output switch is active, it is recommended to
use a transistor output;
(4)If both the relay and the transistor are available, it is
recommended to use a transistor output because the transistor has
no contact life limit and the lifetime will be longer than the
relay as long as the current does not exceed the limit.
