Active Member
|
[China]
Address: No. 3999 LiuJiang Road, Liushi, Yueqing, Wenzhou, Zhejiang, China
Contact name:Sunny Zhang
WENZHOU SANTUO ELECTRICAL CO.,LTD. |
|
|
A, AC Type RCBO 2p 4p Residual Current Circuit Breaker with Over Load Protection with CE, CB, SAA Approval and Testing Report 10-40A 30mA
GENERAL
RCBO is mainly used in AC 50Hz(60Hz), rated voltage 230/400V, rated
current 6A to 40A low voltage terminal distribution system. RCBO is
equal with MCB+RCD function; It is used for electric shock
protection and human indirect contact protection, electric
equipment protection when human body touching electricity or
electric network leak current exceeds stipulated value,and over
load and short circuit protection ; It can also be a non-frequency
operator in the circuit, wildly used in the residential and
commercial district. It complies with standard of IEC61009-1.
SPECIFICATIONS:
| Standard | Unit | IEC/EN 61009-1 | |
Electrical features | Mode | Electro-magnetic type ,electronic type | |
| Type(wave form of the earth leakage sensed) | A, AC | ||
| Thermo-magnetic release characteristic | B,C,D | ||
| Rated current ln | A | 6,10,16,20,25,32,40 | |
| Poles | P | 1P+N, 3P+N | |
| Rated voltage Ue | V | AC 230, 400 | |
| Rated sensitivity I△n | A | 0.01, 0.03, 0.1, 0.3, 0.5 | |
| Rated residual making and breaking capacity l△m | A | 500 | |
| Rated short-circuit capacity Icn | A | 6000 | |
| Break time under I△n | S | ≤0.1 | |
| Rated frequency | Hz | 50/60 | |
| Rated impulsewithstand voltage(1.2/50)Uimp | V | 4000 | |
| Dielectric test voltage at ind.Freq for 1min | kV | 2 | |
| Insulation voltage Ui | V | 250 | |
| Pollution degree | 2 | ||
Mechanical features | Electrical life | 4000 | |
| Mechanical life | 10000 | ||
| Fault current Indicator | YES | ||
| Protection degree | IP20 | ||
Ambient temperature (with daily average≤35ºC) | ºC | -5~+40(Special application please refer to temperature compensation correction) | |
| Storage temperature | ºC | -25~+70 | |
| Installation | Terminal connection type | Cable/Pin-type busbar/U-type busbar | |
| Terminal size top/bottom for cable | mm2 | 25 | |
| AWG | 18-5 | ||
| Terminal size top/bottom for busbar | mm2 | 25 | |
| AWG | 18-3 | ||
| Mounting | On DIN rail EN 60715(35mm)by means of fast clip device | ||
| Connection | From top |
