Xiamen Comwinning Imp.&Exp.Co.,Ltd |
Verified Suppliers
|
|
VFD Rack And Pinion Hoist Max Lifting Height 250/400 M For Man And Material
Features and Advantages
* The material hoist runs without vibration or trembling.
* The passenger and material elevator is reliable with very little
breakdown and is durable with very long work-life.
* Adopt helical reducers made specially for rack and pinion
elevators, extremely strong, reliable and durable.
* Racks centering at mast reduce partial load torque of builders
hoists, makes the construction hoists run more stably and smoothly.
* Applying non-eccentric rollers, make the installation of
construction site elevators be faster and easier, with much less
error.
* The integrated elevator car roof, which made by a steel plate
with edges fully, enhance hoist cage strength and ensure no water
leakage.
* Easy access to electrical panels of elevator for maintenance
* Certified safety braking system of rack and pinion hoist.
* The elevators are equipped with full set of safety facilities,
including centrifugal brake, limit switches, Electromechanical
interlocks.
* Frequency control unit (FC), with closed-loop, which gives the
passenger and material hoists very smooth starting and stopping
with low starting current and less wear and tear.
Technical Data
Description | Rack and Pinion Elevator SC200/200 KP-B09, B10 |
Payload capacity | 2,000 kg |
Lifting speed | 0–60 m/min. |
Max. lifting height | 250/400 m* |
Cage width (internal) | 1.5 m |
Cage length (internal) | 3.2 m |
Cage height (internal) | 2.35 m |
Motor control | FC control |
Engine power | 2x23 kw/87Hz |
Gearbox | Helical reducer |
Safety device type | centrifugal brake |
Power supply range | 380–500 V, 50 or 60 Hz, 3 phase |
Type of mast | square column 650*650*1508 mm with bolted rack |
Rack module | 8 |
* Increased lifting height on request. 250 m with step-up transformer only. 400 m with step-up/step-down transformer. |