Xiamen Comwinning Imp.&Exp.Co.,Ltd |
Verified Suppliers
|
|
Automatic Control Q345 Steel Plate Construction Material Hoist
Construction Material Hoist Application
We are special supplier of building hoist in China, our building hoist have been Widely exported to all over the world and won good reputation, whose payload capacity is as much as 6000kg, lifting speed can reach up to 96m/min, and the erection height reaches up to 450m., our products have been widely used for transportation for both men and cargo in field of general buildings, but also industry, electric power, mining well, oil, chemical industry etc.
Construction Material Hoist Configuration
There is a electrical small crane available to facilitate the
assembly of the construction elevator.
There is the additional 'C' door at cage side for convenient
loading/unloading.
Available in single or twin hoist cage configuration.
The construction rack and pinion elevators are Variable Frequency
Drive (VFD), with low starting current and much less wear and tear,
very smooth starting and stopping.
Manual or Automatic Controls of the hoist is optional.
Lighting inside construction elevator car is LED ceiling lamp
The construction material hoist cage roof doors are equipped with
Interlock.
Construction Material Hoist Technical Data
Item & Article No. | SC300BG, MP-B15; SC300/300BG, MP-B16 |
Payload Capacity | 3000KG per Cage |
Lifting Speed | 0–60 m/min. |
Max. Lifting Height | 250/400 m* |
Cage Width (Internal) | 1.5 m |
Cage Length (Internal) | 3.2 m |
Cage Height (Internal) | 2.35 m |
Cage Doors | 3 Doors, Entry Door + Exit Door + Side Door |
Motor Control | FC (Frequency Control) |
Engine Power | 3x23 KW per Cage |
Gearbox | Helical Gearbox |
Safety Device Type | Centrifugal Brake |
Power Supply Range | 380–500 V, 50 or 60 Hz, 3 Phase |
Mast Section | Square Column 650*650*1508 mm with Bolted Rack |
Rack module | 8 |
* Increased lifting height on request. 250 m with step-up transformer only. 400 m with step-up/step-down transformer. |