|
[China]
Trade Verify
Address: Rm. 704, No. 30, Binglang Dongli, Siming District, Xiamen, China
Contact name:Chen Junjie
Xiamen Comwinning Imp.&Exp.Co.,Ltd |
|
Verified Suppliers
|
|
|
3 Door 3 Ton Construction Man Material Hoist SC300/300 Frequency Control
Construction Man and Material Hoist Application
We are the specialized supplier of builer's hoist in China. Our building hoists have been exported overseas and won good reputation.
The payload capacity range from 1 ton to 3.2 tons, lifting speed can reach up to 96m/min, and the erection height reaches up to 450m, our products have been widely used for transportation of both men and cargo in field of general buildings, but also industry, electric power, mining well, oil, chemical industry etc.
Construction Material Hoist Configuration
There is a electrical small crane available to facilitate the
assembly of the construction elevator.
There is the additional third door at the long side of cage
for convenient loading/unloading of heavy materials.
Available in single or twin lift car configuration.
This construction rack and pinion elevator is Variable Frequency
Drive (VFD), with low starting current and much less wear and tear,
very smooth starting and stopping.
Manual or Automatic Controls of the elevator is optional.
Lighting inside the elevator car is LED ceiling lamp.
Certified safety brake system, including Up/Down Limit Switches, Emergency Limit Switch, Emergency Switch Button, centrifugal brake Anti-drop Safety Device, etc.
Technical Data
| Item & Article No. | SC300BG, MP-B15; SC300/300BG, MP-B16 |
| Payload Capacity | 3000KG per Cage |
| Lifting Speed | 0–60 m/min. |
| Max. Lifting Height | 250/450 m* |
| Cage Width (Internal) | 1.5 m |
| Cage Length (Internal) | 3.2 m |
| Cage Height (Internal) | 2.35 m |
| Cage Doors | 3 Doors, Entry Door + Exit Door + Side Door at the long side of Cage |
| Motor Control | FC (Frequency Control) |
| Engine Power | 3x23 KW per Cage |
| Gearbox | Helical Gearbox |
| Safety Device Type | Centrifugal Brake |
| Power Supply Range | 380–500 V, 50 or 60 Hz, 3 Phase |
| Mast Section | Square Column 650*650*1508 mm with Bolted Rack |
| Rack module | 8 |
| * Increased lifting height on request. 250 m with step-up transformer only. 450 m with step-up/step-down transformer. | |
